ADT7310 Datasheet, PDF (1/24 Pages) Analog Devices – ±0.5°C Accurate, 16-Bit Digital SPI Temperature Sensor

±0.5°C Accurate, 16-Bit
Digital SPI Temperature Sensor
ADT7310
FEATURES
13- or 16-bit user selectable temperature-to-digital converter
Temperature accuracy ±0.5°C from −40°C to +105°C
No temperature calibration/correction required by user
Power saving 1 sample per second (SPS) mode
Fast first conversion on power-up of 6 ms
SPI-compatible interface
Operating temperature from −55°C to +150°C
Operating voltage: 2.7 V to 5.5 V
Critical overtemperature indicator
Programmable overtemperature/undertemperature interrupt
Low power consumption: 700 μW typical at 3.3 V
Shutdown mode for lower power: 7μW typical at 3.3 V
8-lead narrow SOIC RoHS-compliant package
APPLICATIONS
Medical equipment
Environmental control systems
Computer thermal monitoring
Thermal protection
Industrial process control
Power system monitors
Hand-held applications
GENERAL DESCRIPTION
The ADT7310 is a high accuracy digital temperature sensor
in a narrow SOIC package. It contains a band gap temperature
reference and a 13-bit ADC to monitor and digitize the
temperature to a 0.0625°C resolution. The ADC resolution,
by default, is set to 13 bits (0.0625 °C). This can be changed
to 16 bits (0.0078 °C) by setting Bit 7 in the configuration
register (Register Address 0x01).
The ADT7310 is guaranteed to operate over supply voltages from
2.7 V to 5.5 V. Operating at 3.3 V, the average supply current is
typically 210 μA. The ADT7310 has a shutdown mode that
powers down the device and offers a shutdown current of
typically 2 μA. The ADT7310 is rated for operation over the
−55°C to +150°C temperature range.
The CT pin is an open-drain output that becomes active when
the temperature exceeds a programmable critical temperature
limit. The default critical temperature limit is 147°C. The INT
pin is also an open-drain output that becomes active when the
temperature exceeds a programmable limit. The INT and CT
pins can operate in either comparator or interrupt mode.
FUNCTIONAL BLOCK DIAGRAM
SCLK ¹
DOUT ²
DIN ³
CS ⁴
TEMPERATURE
VALUE
REGISTER
T_HYST
REGISTER
T_HIGH
REGISTER
INTERNAL
REFERENCE
INTERNAL
OSCILLATOR
CONFIGURATION
AND STATUS
REGISTERS
TEMPERATURE
SENSOR
T_CRIT
REGISTER
T_LOW
REGISTER
Σ-Δ
MODULATOR
FILTER
LOGIC
Figure 1.
ADT7310
T_CRIT
T_HIGH
6 CT
5 INT
T_LOW
7 GND
8 V_DD
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone]
©2009 Analog Devices, Inc. All rights reserved.