ADM706P_15 Datasheet, PDF (1/16 Pages) Analog Devices – Microprocessor Supervisory Circuits

3 V, Voltage Monitoring
Microprocessor Supervisory Circuits
Data Sheet ADM706P/ADM706R/ADM706S/ADM706T, ADM708R/ADM708S/ADM708T
FEATURES
Precision supply voltage monitor
2.63 V (ADM706P, ADM706R, ADM708R)
2.93 V (ADM706S, ADM708S)
3.08 V (ADM706T, ADM708T)
100 μA quiescent current
200 ms reset pulse width
Debounced manual reset input (MR)
Independent watchdog timer
1.6 second timeout (ADM706x)
Reset output
Active high (ADM706P)
Active low (ADM706R, ADM706S, ADM706T)
Both active high and active low (ADM708R, ADM708S,
ADM708T)
Voltage monitor for power-fail or low battery warning
Guaranteed RESET valid with VCC = 1 V
Superior upgrade for MAX706P/R/S/T, MAX708R/S/T
APPLICATIONS
Microprocessor systems
Computers
Controllers
Intelligent instruments
Critical microprocessor monitoring
Battery-operated systems
Portable instruments
GENERAL DESCRIPTION
The ADM706P/ADM706R/ADM706S/ADM706T and the
ADM708R/ADM708S/ADM708T microprocessor supervisory
circuits are suitable for monitoring either 3 V or 3.3 V power
supplies.
The ADM706P/ADM706R/ADM706S/ADM706T provide
power-supply monitoring circuitry that generate a reset output
during power-up, power-down, and brownout conditions. The
reset output remains operational with VCC as low as 1 V.
Independent watchdog monitoring circuitry is also provided.
This is activated if the watchdog input has not been toggled
within 1.6 seconds.
In addition, there is a 1.25 V threshold detector for power-fail
warning, low battery detection, or to monitor an additional power
supply. An active low debounced MR input is also included.
FUNCTIONAL BLOCK DIAGRAMS
WATCHDOG
INPUT (WDI)
WATCHDOG
TRANSITION
DETECTOR
WATCHDOG
TIMER
WATCHDOG
OUTPUT (WDO)
MR
V_CC
POWER-FAIL
INPUT (PFI)
V_CC
70μA
V_REF*
1.25V
RESET AND
WATCHDOG
TIMEBASE
RESET
GENERATOR
RESET,
(P = RESET)
ADM706P/ADM706R/
ADM706S/ADM706T
POWER-FAIL
OUTPUT (PFO)
*VOLTAGE _{REFERENCE = 2.63V (P/R), 2.93V (S), 3.08V (T)}
Figure 1. ADM706P/ADM706R/ADM706S/ADM706T
MR
V_CC
POWER-FAIL
INPUT (PFI)
V_CC
70μA
V_REF *
1.25V
RESET
GENERATOR
RESET
RESET
ADM708R/ADM708S/
ADM708T
POWER-FAIL
OUTPUT (PFO)
* VOLTAGE REFERENCE = 2.63V (R), 2.93V (S), 3.08V (T)
Figure 2. ADM708R/ADM708S/ADM708T
The ADM706R, ADM706S, and ADM706T are identical except
for the reset threshold monitor levels, which are 2.63 V, 2.93 V, and
3.08 V, respectively. The ADM706P is identical to the ADM706R
in that the reset threshold is 2.63 V. It differs only in that it has
an active high reset output.
The ADM708R/ADM708S/ADM708T provide similar functio-
nality as the ADM706R/ADM706S/ADM706T and only differ
in that a watchdog timer function is not available. Instead, an
active high reset output (RESET) is provided in addition to the
active low (RESET) output.
All parts are available in narrow 8-lead PDIP and 8-lead SOIC
packages.
Rev. D
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone] ©1995–2014 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com