ADIS16334 Datasheet, PDF (1/20 Pages) Analog Devices – Low Profile Six Degree of Freedom Inertial Sensor

Low Profile
Six Degree of Freedom Inertial Sensor
ADIS16334
FEATURES
Triaxis digital gyroscope with digital range scaling
±75°/sec, ±150°/sec, ±300°/sec settings
Tight orthogonal alignment: <0.05°
Triaxis digital accelerometer: ±5 g
Wide sensor bandwidth: 330 Hz
Autonomous operation and data collection
No external configuration commands required
Start-up time: 180 ms
Factory-calibrated sensitivity, bias, and axial alignment
Calibration temperature range: −20°C to +70°C
SPI-compatible serial interface
Embedded temperature sensor
Programmable operation and control
Automatic and manual bias correction controls
Bartlett window FIR filter length, number of taps
Digital I/O: data ready, alarm indicator, general-purpose
Alarms for condition monitoring
Enable external sample clock input: up to 1.2 kHz
Single-command self-test
Single-supply operation: 4.75 V to 5.25 V
2000 g shock survivability
22 mm × 33 mm × 11 mm module with connector interface
Operating temperature range: −40°C to +105°C
GENERAL DESCRIPTION
The ADIS16334 iSensor® is a complete inertial system that includes
a triaxis gyroscope and triaxis accelerometer. Each sensor in the
ADIS16334 combines industry-leading iMEMS® technology
with signal conditioning that optimizes dynamic performance.
The factory calibration characterizes each sensor for sensitivity,
bias, alignment, and linear acceleration (gyro bias). As a result,
each sensor has its own dynamic compensation formulas that
provide accurate sensor measurements over a temperature
range of −20°C to +70°C.
The ADIS16334 provides a simple, cost-effective method for
integrating accurate, multiaxis, inertial sensing into industrial
systems, especially when compared with the complexity and
investment associated with discrete designs. All necessary motion
testing and calibration are part of the production process at the
factory, greatly reducing system integration time. Tight orthogonal
alignment simplifies inertial frame alignment in navigation systems.
An improved SPI interface and register structure provide faster
data collection and configuration control.
This compact module is approximately 22 mm × 33 mm × 11 mm
and provides a compact connector interface.
APPLICATIONS
Medical instrumentation
Robotics
Platform controls
Navigation
FUNCTIONAL BLOCK DIAGRAM
DIOx
RST
VCC
SELF-TEST
I/O
ALARMS
POWER
MANAGEMENT
GND
TRIAXIAL
ACCEL
TRIAXIAL
GYRO
TEMP
CONTROLLER
CONTROL
REGISTERS
DIGITAL
FILTER
CALIBRATION
CORRECTION
OUTPUT
REGISTERS
SPI
PORT
CS
SCLK
DIN
DOUT
Figure 1.
ADIS16334
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone]
©2011 Analog Devices, Inc. All rights reserved.