ADIS16201_15 Datasheet, PDF (1/32 Pages) Analog Devices – Programmable Dual-Axis Inclinometer/Accelerometer

Data Sheet
FEATURES
Dual-axis inclinometer/accelerometer measurements
12-, 14-bit digital inclination/acceleration sensor outputs
±1.7 g accelerometer measurement range
±90° inclinometer measurement range, linear output
12-bit digital temperature sensor output
Digitally controlled sensitivity and bias calibration
Digitally controlled sample rate
Digitally controlled frequency response
Dual alarm settings with rate/threshold limits
Auxiliary digital I/O
Digitally activated self test
Digitally activated low power mode
SPI®-compatible serial interface
Auxiliary 12-bit ADC input and DAC output
Single-supply operation: 3.0 V to +3.6 V
3500 g powered shock survivability
APPLICATIONS
Platform control, stabilization, and leveling
Tilt sensing, inclinometers
Motion/position measurement
Monitor/alarm devices (security, medical, safety)
GENERAL DESCRIPTION
The ADIS16201 is a complete, dual-axis acceleration and
inclination angle measurement system available in a single
compact package enabled by the Analog Devices iSensor™
integration. By enhancing the Analog Devices iMEMS® sensor
technology with an embedded signal processing solution, the
ADIS16201 provides factory calibrated and tunable digital
sensor data in a convenient format that can be accessed using a
serial peripheral interface (SPI). The SPI interface provides
access to measurements for dual-axis linear acceleration, dual-
axis linear inclination angle, temperature, power supply, and
one auxiliary analog input. Easy access to calibrated digital
sensor data provides developers with a system-ready device,
reducing development time, cost, and program risk.
Unique characteristics of the end system are accommodated
easily through several built-in features, such as a single
command in-system offset calibration, along with convenient
sample rate and bandwidth control.
Programmable Dual-Axis
Inclinometer/Accelerometer
ADIS16201
FUNCTIONAL BLOCK DIAGRAM
AUX AUX
ADC DAC VREF
ADIS16201
TEMPERATURE
SENSOR
DUAL-AXIS
ACCELEROMETER
SELF-TEST
SIGNAL
CONDITIONING
AND
CONVERSION
CALIBRATION
AND
DIGITAL
PROCESSING
DIGITAL
CONTROL
SPI
PORT
CS
SCLK
DIN
DOUT
VDD
COM
POWER
MANAGEMENT
ALARMS
AUXILIARY
I/O
RST
Figure 1.
DIO0 DIO1
The ADIS16201 offers the following embedded features, which
eliminate the need for external circuitry and provide a simplified
system interface:
• Configurable alarm function
• Auxiliary 12-bit ADC
• Auxiliary 12-bit DAC
• Configurable digital I/O port
• Digital self-test function
The ADIS16201 offers two power management features for
managing system-level power dissipation: low power mode and
a configurable shutdown feature.
The ADIS16201 is available in a 9.2 mm × 9.2 mm × 3.9 mm
laminate-based land grid array (LGA) package with a
temperature range of −40°C to +125°C.
Rev. C
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone] ©2006–2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com