ADG812YRUZ Datasheet, PDF (1/16 Pages) Analog Devices – <0.5 Ω CMOS, 1.65 V to 3.6 V, Quad SPST Switches

FEATURES
0.5 Ω typical on resistance
0.8 Ω maximum on resistance at 125°C
1.65 V to 3.6 V operation
Automotive temperature range: −40°C to +125°C
High current carrying capability: 300 mA continuous
Rail-to-rail switching operation
Fast switching times: <25 ns
Typical power consumption <0.1 μW
APPLICATIONS
Cellular phones
MP3 players
Power routing
Battery-powered systems
PCMCIA cards
Modems
Audio and video signal routing
Communications systems
GENERAL DESCRIPTION
The ADG811/ADG812/ADG813 are low voltage CMOS devices
containing four independently selectable switches. These switches
offer ultralow on resistance of less than 0.8 Ω over the full
temperature range. The digital inputs can handle 1.8 V logic
with a 2.7 V to 3.6 V supply.
These devices contain four independent single-pole/single-
throw (SPST) switches. The ADG811 and ADG812 differ only
in that the digital control logic is inverted. The ADG811
switches are turned on with a logic low on the appropriate
control input, while a logic high is required to turn on the
switches of the ADG812. The ADG813 contains two switches
whose digital control logic is similar to the ADG811, while the
logic is inverted on the other two switches.
Each switch conducts equally well in both directions when on
and has an input signal range that extends to the supplies. The
ADG813 exhibits break-before-make switching action.
The ADG811/ADG812/ADG813 are fully specified for 3.3 V,
2.5 V, and 1.8 V supply operation. The ADG811 is available in a
16-lead TSSOP package and a 16-lead LFCSP package, and the
ADG812/ADG813 are available in a 16-lead TSSOP package.
<0.5 Ω CMOS, 1.65 V to 3.6 V,
Quad SPST Switches
ADG811/ADG812/ADG813
FUNCTIONAL BLOCK DIAGRAMS
S1
S1
S1
IN1
IN1
IN1
D1
D1
D1
S2
S2
S2
IN2
IN2
IN2
D2
ADG811
S3
D2
ADG812
S3
D2
ADG813
S3
IN3
IN3
IN3
D3
D3
D3
S4
S4
S4
IN4
IN4
IN4
D4
D4
D4
SWITCHES SHOWN FOR A LOGIC 1 INPUT
Figure 1.
PRODUCT HIGHLIGHTS
1. <0.8 Ω over full temperature range of −40°C to +125°C.
2. Single 1.65 V to 3.6 V operation.
3. Operational with 1.8 V CMOS logic.
4. High current handling capability (300 mA continuous
current at 3.3 V).
5. Low THD + N (0.02% typical).
6. Small 3 mm × 3 mm LFCSP package and 16-lead TSSOP
package.
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone] ©2003–2009 Analog Devices, Inc. All rights reserved.