ADG411_15 Datasheet, PDF (1/16 Pages) Analog Devices – LC MOS Precision Quad SPST Switches

LC²MOS
Precision Quad SPST Switches
ADG411/ADG412/ADG413
FEATURES
The ADG411, ADG412, and ADG413 contain four independent
44 V supply maximum ratings
±15 V analog signal range
Low on resistance (< 35 Ω)
Ultralow power dissipation (35 μW)
Fast switching times
tON < 175 ns
SPST switches. The ADG411 and ADG412 differ only in that
the digital control logic is inverted. The ADG411 switches are
turned on with a logic low on the appropriate control input,
while a logic high is required for the ADG412. The ADG413
has two switches with digital control logic similar to that of the
ADG411 while the logic is inverted on the other two switches.
tOFF < 145 ns
Each switch conducts equally well in both directions when on,
TTL-/CMOS-compatible
and each has an input signal range that extends to the supplies.
Plug-in replacement for DG411/DG412/DG413
In the off condition, signal levels up to the supplies are blocked.
APPLICATIONS
Audio and video switching
Automatic test equipment
Precision data acquisition
Battery-powered systems
Sample-and-hold systems
Communication systems
GENERAL DESCRIPTION
All switches exhibit break-before-make switching action for use
in multiplexer applications. Inherent in the design is low charge
injection for minimum transients when switching the digital
inputs.
PRODUCT HIGHLIGHTS
1. Extended signal range
The ADG411, ADG412, and ADG413 are fabricated on an
enhanced LC²MOS, giving an increased signal range which
extends fully to the supply rails.
The ADG411, ADG412, and ADG413 are monolithic CMOS
devices comprising four independently selectable switches.
They are designed on an enhanced LC²MOS process which
provides low power dissipation yet gives high switching speed
and low on resistance.
The on resistance profile is very flat over the full analog input
range ensuring excellent linearity and low distortion when
switching audio signals. Fast switching speed coupled with high
signal bandwidth also make the parts suitable for video signal
switching. CMOS construction ensures ultralow power
dissipation, making the parts ideally suited for portable and
battery-powered instruments.
2. Ultralow power dissipation
3. Low RON
4. Break-before-make switching
This prevents channel shorting when the switches are
configured as a multiplexer.
5. Single-supply operation
For applications where the analog signal is unipolar, the
ADG411, ADG412, and ADG413 can be operated from a
single-rail power supply. The parts are fully specified with a
single 12 V power supply and remain functional with single
supplies as low as 5 V.
FUNCTIONAL BLOCK DIAGRAMS
S1
IN1
D1
S2
IN2
D2
ADG411
S3
IN3
D3
S4
IN4
D4
SWITCHES SHOWN FOR A LOGIC 1 INPUT
Figure 1. ADG411
S1
IN1
D1
S2
IN2
D2
ADG412
S3
IN3
D3
S4
IN4
D4
SWITCHES SHOWN FOR A LOGIC 1 INPUT
Figure 2. ADG412
S1
IN1
D1
S2
IN2
D2
ADG413
S3
IN3
D3
S4
IN4
D4
SWITCHES SHOWN FOR A LOGIC 1 INPUT
Figure 3. ADG413
Rev. D
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone]
©2010 Analog Devices, Inc. All rights reserved.