ADG3246_15 Datasheet, PDF (1/12 Pages) Analog Devices – 2.5 V/3.3 V, 10-Bit, 2-Port Level Translating, Bus Switch

FEATURES
225 ps Propagation Delay through the Switch
4.5 ⍀ Switch Connection between Ports
Data Rate 1.244 Gbps
2.5 V/3.3 V Supply Operation
Selectable Level Shifting/Translation
Small Signal Bandwidth 610 MHz
Level Translation
3.3 V to 2.5 V
3.3 V to 1.8 V
2.5 V to 1.8 V
24-Lead TSSOP and LFCSP Packages
APPLICATIONS
3.3 V to 1.8 V Voltage Translation
3.3 V to 2.5 V Voltage Translation
2.5 V to 1.8 V Voltage Translation
Bus Switching
Bus Isolation
Hot Swap
Hot Plug
Analog Signal Switching
2.5 V/3.3 V, 10-Bit, 2-Port
Level Translating, Bus Switch
ADG3246
FUNCTIONAL BLOCK DIAGRAM
A0
B0
A9
B9
BE
GENERAL DESCRIPTION
The ADG3246 is a 2.5 V or 3.3 V, 10-bit, 2-port digital switch.
It is designed on Analog Devices’ low voltage CMOS process,
which provides low power dissipation yet gives high switching
speed and very low on resistance, allowing inputs to be connected
to outputs without additional propagation delay or generating
additional ground bounce noise.
The switches are enabled by means of the bus enable (BE)
input signal. These digital switches allow bidirectional signals to
be switched when ON. In the OFF condition, signal levels up to
the supplies are blocked.
This device is ideal for applications requiring level translation.
When operated from a 3.3 V supply, level translation from 3.3 V
inputs to 2.5 V outputs occurs. Similarly, if the device is oper-
ated from a 2.5 V supply and 2.5 V inputs are applied, the device
will translate the outputs to 1.8 V. In addition to this, the ADG3246
has a level translating select pin (SEL). When SEL is low, V_CC is
reduced internally, allowing for level translation between 3.3 V
inputs and 1.8 V outputs. This makes the device suited to appli-
cations requiring level translation between different supplies,
such as converter to DSP/microcontroller interfacing.
PRODUCT HIGHLIGHTS
1. 3.3 V or 2.5 V supply operation
2. Extremely low propagation delay through switch
3. 4.5 W switches connect inputs to outputs
4. Level/voltage translation
5. 24-lead 4 mm ¥ 4 mm LFCSP and 24-lead TSSOP packages
REV. 0
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties that
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective companies.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone] © 2003 Analog Devices, Inc. All rights reserved.