English
Language : 

ADG3241_15 Datasheet, PDF (1/16 Pages) Analog Devices – 2.5 V/3.3 V, 1-Bit, 2-Port Level Translator Bus Switch in SOT-66
2.5 V/3.3 V, 1-Bit, 2-Port
Level Translator Bus Switch in SOT-66
ADG3241
FEATURES
225 ps propagation delay through the switch
4.5 Ω switch connection between ports
Data rate 1.5 Gbps
2.5 V/3.3 V supply operation
Selectable level shifting/translation
Level translation
3.3 V to 2.5 V
3.3 V to 1.8 V
2.5 V to 1.8 V
Small signal bandwidth 770 MHz
Tiny 6-lead SC70 package and 6-lead SOT-66 package
APPLICATIONS
3.3 V to 1.8 V voltage translation
3.3 V to 2.5 V voltage translation
2.5 V to 1.8 V voltage translation
Bus switching
Bus isolation
Hot swap
Hot plug
Analog switch applications
GENERAL DESCRIPTION
The ADG3241 is a 2.5 V or 3.3 V single digital switch. It is
designed on a low voltage CMOS process that provides low
power dissipation yet gives high switching speed and very low
on resistance. This allows the input to be connected to the
output without additional propagation delay or generating
additional ground bounce noise.
The switch is enabled by means of the bus enable (BE) input
signal. This digital switch allows a bidirectional signal to be
switched when on. In the off condition, signal levels up to the
supplies are blocked.
This device is ideal for applications requiring level translation.
When operated from a 3.3 V supply, level translation from 3.3 V
inputs to 2.5 V outputs is allowed. Similarly, if the device is
operated from a 2.5 V supply and 2.5 V inputs are applied, the
device translates the outputs to 1.8 V. In addition to this, a level
FUNCTIONAL BLOCK DIAGRAM
A
B
BE
Figure 1.
translating select pin (SEL) is included. When SEL is low, VCC is
reduced internally, allowing for level translation between 3.3 V
inputs and 1.8 V outputs. This makes the device suited to
applications requiring level translation between different
supplies, such as converter to DSP/microcontroller interfacing.
PRODUCT HIGHLIGHTS
1. 3.3 V or 2.5 V supply operation.
2. Extremely low propagation delay through switch.
3. 4.5 Ω switches connect inputs to outputs.
4. Level and voltage translation.
5. Tiny, SC70 package and SOT-66 package.
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2006 Analog Devices, Inc. All rights reserved.