ADG3241 Datasheet, PDF (1/12 Pages) Analog Devices – 2.5 V/3.3 V, 1-Bit, 2-Port Level Translator Bus Switch in SOT-66

2.5 V/3.3 V, 1-Bit, 2-Port
Level Translator Bus Switch in SOT-66
ADG3241
FEATURES
225 ps Propagation Delay through the Switch
4.5 ⍀ Switch Connection between Ports
Data Rate 1.5 Gbps
2.5 V/3.3 V Supply Operation
Selectable Level Shifting/Translation
Level Translation
3.3 V to 2.5 V
3.3 V to 1.8 V
2.5 V to 1.8 V
Small Signal Bandwidth 770 MHz
Tiny 6-Lead SC70 Package and 6-Lead SOT-66 Package
APPLICATIONS
3.3 V to 1.8 V Voltage Translation
3.3 V to 2.5 V Voltage Translation
2.5 V to 1.8 V Voltage Translation
Bus Switching
Bus Isolation
Hot Swap
Hot Plug
Analog Switch Applications
GENERAL DESCRIPTION
The ADG3241 is a 2.5 V or 3.3 V, single digital switch. It is
designed on a low voltage CMOS process, which provides low
power dissipation yet gives high switching speed and very low on
resistance. This allows the input to be connected to the output
without additional propagation delay or generating additional
ground bounce noise.
The switch is enabled by means of the bus enable (BE) input
signal. This digital switch allows a bidirectional signal to be
switched when ON. In the OFF condition, signal levels up to
the supplies are blocked.
This device is ideal for applications requiring level translation.
When operated from a 3.3 V supply, level translation from 3.3 V
inputs to 2.5 V outputs is allowed. Similarly, if the device is
operated from a 2.5 V supply and 2.5 V inputs are applied, the
device will translate the outputs to 1.8 V. In addition to this, a
level translating select pin (SEL) is included. When SEL is low,
V_CC is reduced internally, allowing for level translation between
3.3 V inputs and 1.8 V outputs. This makes the device suited to
applications requiring level translation between different supplies,
such as converter to DSP/microcontroller interfacing.
FUNCTIONAL BLOCK DIAGRAM
A
B
BE
PRODUCT HIGHLIGHTS
1. 3.3 V or 2.5 V supply operation.
2. Extremely low propagation delay through switch.
3. 4.5 Ω switches connect inputs to outputs.
4. Level/voltage translation.
5. Tiny SC70 package and SOT-66 package.
REV. A
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties that
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone] © 2004 Analog Devices, Inc. All rights reserved.