ADG211AKNZ Datasheet, PDF (1/16 Pages) Analog Devices – LC2MOS Quad SPST Switches

Data Sheet
FEATURES
44 V supply maximum rating
±15 V analog signal range
Low RON: 115 Ω maximum
Low leakage: 0.5 nA typical
Break-before-make switching
Single supply operation possible
Extended plastic temperature range: −40°C to +85°C
TTL/CMOS compatible
Available in 16-lead PDIP/SOIC and 20-pead PLCC packages
Pin compatible to DG211/DG212
GENERAL DESCRIPTION
The ADG211A and ADG212A are monolithic CMOS devices
comprising four independently selectable switches. They are
designed on an enhanced LC²MOS process, which gives an
increased signal handling capability of ±15 V. These switches
also feature high switching speeds and low RON.
The ADG211A and ADG212A consist of four SPST switches.
They differ only in that the digital control logic is inverted. In
multiplexer applications, all switches exhibit break-before-make
switching action when driven simultaneously. Inherent in the
design is low charge injection for minimum transients when
switching the digital inputs.
LC²MOS
Quad SPST Switches
ADG211A/ADG212A
FUNCTIONAL BLOCK DIAGRAM
ADG211A
S1
IN1
D1
S2
IN2
D2
S3
IN3
D3
S4
IN4
D4
NOTES
1. SWITCHES SHOWN FOR A LOGIC 1 INPUT.
Figure 1.
ADG212A
S1
IN1
D1
S2
IN2
D2
S3
IN3
D3
S4
IN4
D4
NOTES
1. SWITCHES SHOWN FOR A LOGIC 1 INPUT.
Figure 2.
PRODUCT HIGHLIGHTS
1. Extended Signal Range.
These switches are fabricated on an enhanced LC²MOS
process, resulting in high breakdown and an increased
analog signal range of ±15 V.
2. Single Supply Operation.
For applications where the analog signal is unipolar (0 V to
15 V), the switches can be operated from a single 15 V
supply.
3. Low Leakage.
Leakage currents in the range of 500 pA make these
switches suitable for high precision circuits. The added
feature of break-before-make allows for multiple outputs
to be tied together for multiplexer applications while
keeping leakage errors to a minimum.
Rev. C
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
©2012 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com