ADG1404_15 Datasheet, PDF (1/16 Pages) Analog Devices – 1.5 On Resistance

1.5 Ω On Resistance,
±15 V/12 V/±5 V, 4:1, iCMOS Multiplexer
ADG1404
FEATURES
1.5 Ω on resistance
0.3 Ω on-resistance flatness
0.1 Ω on-resistance match between channels
Up to 400 mA continuous current
Fully specified at +12 V, ±15 V, and ±5 V
No VL supply required
3 V logic-compatible inputs
Rail-to-rail operation
14-lead TSSOP and 4 mm × 4 mm, 16-lead LFCSP
APPLICATIONS
Automatic test equipment
Data acquisition systems
Battery-powered systems
Sample-and-hold systems
Audio signal routing
Communication systems
Relay replacement
GENERAL DESCRIPTION
The ADG1404 is a complementary metal-oxide semiconductor
(CMOS) analog multiplexer, comprising four single channels
designed on an iCMOS® process. iCMOS (industrial CMOS) is
a modular manufacturing process that combines high voltage
CMOS and bipolar technologies. It enables the development of
a wide range of high performance analog ICs capable of 33 V
operation in a footprint that no previous generation of high
voltage parts has been able to achieve. Unlike analog ICs using
conventional CMOS processes, iCMOS components can
tolerate high supply voltages while providing increased
performance, dramatically lower power consumption, and
reduced package size.
The on-resistance profile is very flat over the full analog input
range, ensuring excellent linearity and low distortion when
switching audio signals.
iCMOS construction ensures ultralow power dissipation,
making the parts ideally suited for portable and battery-
powered instruments.
FUNCTIONAL BLOCK DIAGRAM
ADG1404
S1
S2
D
S3
S4
1 OF 4
DECODER
A0 A1 EN
Figure 1.
The ADG1404 switches one of four inputs to a common output,
D, as determined by the 3-bit binary address lines, A0, A1, and
EN. Logic 0 on the EN pin disables the device. Each switch
conducts equally well in both directions when on and has an
input signal range that extends to the supplies. In the off condi-
tion, signal levels up to the supplies are blocked. All switches
exhibit break-before-make switching action. Inherent in the
design is low charge injection for minimum transients when
switching the digital inputs.
PRODUCT HIGHLIGHTS
1. 2.6 Ω maximum on resistance over temperature.
2. Minimum distortion.
3. Ultralow power dissipation: <0.03 μW.
4. 14-lead TSSOP and 16-lead, 4 mm × 4 mm LFCSP package.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone] ©2008–2009 Analog Devices, Inc. All rights reserved.