ADF7030-1 Datasheet, PDF (1/15 Pages) Analog Devices – Hardware Reference Manual

ADF7030-1 Hardware Reference Manual
UG-957
One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: [phone] • Fax: [phone] • www.analog.com
ADF7030-1 Hardware Reference Manual
SCOPE
This reference manual provides a description of the ADF7030-1
radio functionality, hardware features, and application circuit
requirements. It is intended as a resource for a hardware engineer
designing a printed circuit board (PCB) that includes the
ADF7030-1.
ABOUT THE ADF7030-1
The ADF7030-1 is a low power, high performance, fully
integrated radio transceiver that supports a wide range of
modulation scheme and channel widths in the sub GHz
frequency range.
The ADF7030-1 features an on-chip ARM® Cortex®-M0
processor that performs radio control and radio packet
management.
OTHER RELEVANT DOCUMENTATION
Complete specifications for the ADF7030-1 device can be found
in the ADF7030-1 data sheet. The ADF7030-1software reference
manual is the programming guide for the ADF7030-1 and is
available from Analog Devices, Inc. Both the ADF7030-1 data
sheet and software reference manual documents should be
consulted in conjunction with this hardware reference manual.
CREGx
HFXTALN HFXTALP GPIO6 GPIO7
LDOx
TCXO 26MHz
BUFFER OSC
32kHz
OSC
26kHz
RCOSC
ADF7030-1
INTERRUPT
CONTROLLER
LNAIN1
LNAIN2
PAOUT1
LNA
RECEIVER
PA
SYNTHESIZER
DIGITAL
BASEBAND
ARM^®
CORTEX^®-M0
ROM
SPI
SLAVE
CONFIGURABLE
GPIOs
SPI
GPIOx
PAOUT2
PA
TRANSMITTER
RAM
TEMP SENSOR
NOTES
1. CREGx, GPIOx, AND SPI CONTAIN MULTIPLE PINS.
Figure 1. Functional Block Diagram
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 15