ADA4940-1_16 Datasheet, PDF (1/30 Pages) Analog Devices – Ultralow Power, Low Distortion, Fully Differential ADC Drivers

Data Sheet
Ultralow Power, Low Distortion,
Fully Differential ADC Drivers
ADA4940-1/ADA4940-2
FEATURES
Small signal bandwidth: 260 MHz
Ultralow power 1.25mA
Extremely low harmonic distortion
−122 dB THD at 50 kHz
−96 dB THD at 1 MHz
Low input voltage noise: 3.9 nV/√Hz
0.35 mV maximum offset voltage
Balanced outputs
Settling time to 0.1%: 34 ns
Rail-to-rail output: −VS + 0.1 V to +VS − 0.1 V
Adjustable output common-mode voltage
Flexible power supplies: 3 V to 7 V (LFCSP)
Disable pin to reduce power consumption
ADA4940-1 is available in LFCSP and SOIC packages
APPLICATIONS
Low power PulSAR®/SAR ADC drivers
Single-ended-to-differential conversion
Differential buffers
Line drivers
Medical imaging
Industrial process controls
Portable electronics
GENERAL DESCRIPTION
The ADA4940-1/ADA4940-2 are low noise, low distortion fully
differential amplifiers with very low power consumption. They
are an ideal choice for driving low power, high resolution, high
performance SAR and Σ-Δ analog-to-digital converters (ADCs)
with resolutions up to 16 bits from dc to 1 MHz on only 1.25 mA
of quiescent current. The adjustable level of the output common-
mode voltage allows the ADA4940-1/ADA4940-2 to match the
input common-mode voltage of multiple ADCs. The internal
common-mode feedback loop provides exceptional output balance,
as well as suppression of even-order harmonic distortion products.
With the ADA4940-1/ADA4940-2, differential gain configurations
are easily realized with a simple external feedback network of
four resistors determining the closed-loop gain of the amplifier.
The ADA4940-1/ADA4940-2 are fabricated using Analog Devices,
Inc., SiGe complementary bipolar process, enabling them to
achieve very low levels of distortion with an input voltage noise
of only 3.9 nV/√Hz. The low dc offset and excellent dynamic
performance of the ADA4940-1/ADA4940-2 make them well
suited for a variety of data acquisition and signal processing
applications.
Rev. D
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
FUNCTIONAL BLOCK DIAGRAMS
ADA4940-1
–FB 1
+IN 2
–IN 3
+FB 4
12 DISABLE
11 –OUT
10 +OUT
9 V_OCM
NOTES
1. CONNECT THE EXPOSED PAD TO
–V_S OR GROUND.
Figure 1. ADA4940-1
–IN1 1
+FB1 2
+V_S1 3
+V_S1 4
–FB2 5
+IN2 6
ADA4940-2
18 +OUT1
17 VOCM1
16 –VS2
15 –VS2
14 DISABLE1
13 –OUT2
NOTES
1. CONNECT THE EXPOSED PAD TO
–V_S OR GROUND.
Figure 2. ADA4940-2
The ADA4940-1 is available in a 3 mm × 3 mm, 16-lead LFCSP
and an 8-lead SOIC. The ADA4940-2 is available in a 4 mm ×
4 mm, 24-lead LFCSP. The pinouts are optimized to facilitate
printed circuit board (PCB) layout and minimize distortion.
The ADA4940-1/ADA4940-2 are specified to operate over the
−40°C to +125°C temperature range.
Table 1. Similar Products to ADA4940-1/ADA4940-2
Product
ISUPPLY
(mA)
Bandwidth Slew Rate Noise
(MHz)
(V/μs)
(nV/√Hz)
AD8137
3
110
450
8.25
ADA4932-1 9
560
2800
3.6
ADA4941-1 2.2
31
22
5.1
Table 2. Complementary Products to ADA4940-1/ADA4940-2
Power
Product (mW)
Throughput Resolution SNR
(MSPS)
(Bits)
(dB)
AD7982 7.0
1
18
98
AD7984 10.5
1.333
18
96.5
AD7621 65
3
16
88
AD7623 45
1.333
16
88
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone] ©2011–2016 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com