ADA4850-1_16 Datasheet, PDF (1/14 Pages) Analog Devices – High Speed, Rail-to-Rail Output Op Amps with Ultralow Power-Down

Data Sheet
High Speed, Rail-to-Rail Output
Op Amps with Ultralow Power-Down
ADA4850-1/ADA4850-2
FEATURES
Ultralow power-down current: 150 nA/amplifier maximum
Low quiescent current: 2.4 mA/amplifier
High speed
175 MHz, −3 dB bandwidth
220 V/μs slew rate
85 ns settling time to 0.1%
Excellent video specifications
0.1 dB flatness: 14 MHz
Differential gain: 0.12%
Differential phase: 0.09°
Single-supply operation: 2.7 V to 6 V
Rail-to-rail output
Output swings to within 80 mV of either rail
Low voltage offset: 0.6 mV
APPLICATIONS
Portable multimedia players
Video cameras
Digital still cameras
Consumer video
Clock buffers
GENERAL DESCRIPTION
The ADA4850-1/ADA4850-2 are low price, high speed, voltage
feedbacks rail-to-rail output op amps with ultralow power-down.
Despite their low price, the ADA4850-1/ADA4850-2 provide
excellent overall performance and versatility. The 175 MHz,
−3 dB bandwidth and 220 V/μs slew rate make these amplifiers
well-suited for many general-purpose, high speed applications.
The ADA4850-1/ADA4850-2 are designed to operate at supply
voltages as low as 2.7 V and up to 6 V at 2.4 mA of supply
current per amplifier. In power-down mode, the supply current
is less than 150 nA, ideal for battery-powered applications.
The ADA4850-1/ADA4850-2 family provides users with a true
single-supply capability, allowing input signals to extend
200 mV below the negative rail and to within 2.2 V of the
positive rail. The output of the amplifier can swing within
80 mV of either supply rail.
With its combination of low price, excellent differential gain
(0.12%), differential phase (0.09°), and 0.1 dB flatness out to
14 MHz, these amplifiers are ideal for video applications.
PIN CONFIGURATIONS
ADA4850-1
TOP VIEW
POWER DOWN 1
NIC 2
–IN 3
+IN 4
8 +V_S
7 OUTPUT
6 NIC
5 –V_S
NOTES
1. EXPOSED PAD CAN BE CONNECTED TO GND,
OR LEFT FLOATING.
2. NIC = NO INTERNAL CONNECTION.
Figure 1. 8-Lead, 3 mm × 3 mm LFCSP
ADA4850-2
TOP VIEW
V_OUT1 1
–IN1 2
+IN1 3
–V_S 4
12 +V_S
11 V_OUT2
10 –IN2
9 +IN2
NOTES
1. EXPOSED PAD CAN BE CONNECTED TO GND,
OR LEFT FLOATING.
2. NIC = NO INTERNAL CONNECTION.
Figure 2. 16-Lead, 3 mm × 3 mm LFCSP
The ADA4850-1/ADA4850-2 are designed to work in the
extended temperature range of −40°C to +125°C.
2
1
0
–1
–2
–3
–4
G = +1
–5
V_S = 5V
R_L = 1k
V_OUT = 0.1V p-p
–6
1
10
100
FREQUENCY (MHz)
Figure 3. Small Signal Frequency Response
1000
Rev. D
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone] ©2005–2016 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com