AD9990 Datasheet, PDF (1/2 Pages) Analog Devices – Dual Channel, 14-Bit CCD Signal Processor with V-Driver and Precision Timing

Dual Channel, 14-Bit CCD Signal Processor
with V-Driver and Precision Timing
AD9990
FEATURES
1.8 V AFETG core
Internal LDO regulators
24 programmable vertical clock signals
Correlated double sampler (CDS) with
−3 dB, 0 dB, +3 dB, and +6 dB gain
6 dB to 42 dB, 10-bit variable gain amplifier (VGA)
14-bit, 32 Hz analog-to-digital converter (ADC)
Black level clamp with variable level control
Complete on-chip timing generator
Precision Timing core with ~488 ps resolution
On-chip 3 V horizontal and RG drivers
General-purpose outputs (GPOs) for shutter and
system support
On-chip driver for external crystal
On-chip sync generator with external sync input
112-ball CSP_BGA package, 8 mm × 8 mm, 0.65 mm pitch
APPLICATIONS
Digital still cameras
GENERAL DESCRIPTION
The AD9990 is a highly integrated CCD signal processor for
digital still camera applications. It includes a complete analog
front end with analog-to-digital conversion and a full-function
programmable timing generator for a 2-channel output CCD.
Each channel is specified up to 32 MHz. The timing generator is
capable of supporting up to 24 vertical clock signals to control
advanced CCDs. A Precision Timing™ core allows adjustment of
high speed clocks with approximately 488 ps resolution at 32 MHz
operation. The AD9990 also contains eight general-purpose
outputs that can be used for shutter and system functions.
Each analog front end includes black level clamping, a CDS, a
VGA, and a 14-bit ADC. The timing generator provides all the
necessary CCD clocks: RG, H-clocks, V-clocks, sensor gate
pulses, substrate clock, and substrate bias control.
The AD9990 is specified over an operating temperature range
of −25°C to +85°C.
For more information about the AD9990, contact Analog Devices
via email at [e-mail].
FUNCTIONAL BLOCK DIAGRAM
REFT_A REFB_A
REFT_B REFB_B
–3dB, 0dB, +3dB, +6dB
CCDIN_A
CDS
VGA
VREF_A
6dB TO 42dB
–3dB, 0dB, +3dB, +6dB
14-BIT
ADC
VREF_B
14
CLAMP
CCDIN_B
3V INPUT
1.8V OUTPUT
3V INPUT
1.8V OUTPUT
RG_A, RG_B
HL_A, HL_B
H1A TO H4A, H1B TO H4B
CDS
VGA
LDO
REG_A
6dB TO 42dB
LDO
REG_B
2
2
HORIZONTAL
DRIVERS
8
14-BIT
ADC
14
CLAMP
INTERNAL CLOCKS
PRECISION
TIMING
GENERATOR
24
XV1 TO XV24
SUBCK
VERTICAL
TIMING
CONTROL
8
SYNC
GENERATOR
AD9990
DATA
OUTPUT
MUX
14
INTERNAL
REGISTERS
DOUT
SL
SCK
SDATA
GPO1 TO GPO8
Figure 1.
HD VD SYNC CLI CLO RSTB
Rev. Sp0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone]
©2007 Analog Devices, Inc. All rights reserved.