AD9985A_15 Datasheet, PDF (1/32 Pages) Analog Devices – 110 MSPS/140 MSPS Analog Interface for Flat Panel Displays

FEATURES
Variable analog input bandwidth control
Variable SOGIN bandwidth control
Automated clamping level adjustment
140 MSPS maximum conversion rate
300 MHz analog bandwidth
0.5 V to 1.0 V analog input range
500 ps p-p PLL clock jitter at 110 MSPS
3.3 V power supply
Full sync processing
Selectable input filtering
Sync detect for hot plugging
Midscale clamping
Power-down mode
Low power: 500 mW typical
4:2:2 output format mode
APPLICATIONS
RGB graphics processing
LCD monitors and projectors
Plasma display panels
Scan converters
Microdisplays
Digital TVs
110 MSPS/140 MSPS
Analog Interface for Flat Panel Displays
AD9985A
R_IN
G_IN
B_IN
HSYNC
COAST
CLAMP
FILT
SOGIN
SCL
SDA
A0
FUNCTIONAL BLOCK DIAGRAM
AUTO-CLAMP
LEVEL ADJUST
CLAMP
8
A/D
R_OUTA
AUTO-CLAMP
LEVEL ADJUST
CLAMP
8
A/D
AUTO-CLAMP
LEVEL ADJUST
CLAMP
8
A/D
SYNC
PROCESSING
AND CLOCK
GENERATION
SERIAL REGISTER AND
POWER MANAGEMENT
REF
AD9985A
G_OUTA
B_OUTA
MIDSCV
DTACK
HSOUT
VSOUT
SOGOUT
REF
BYPASS
Figure 1.
GENERAL DESCRIPTION
The AD9985A is a complete 8-bit, 140 MSPS, monolithic
analog interface optimized for capturing RGB graphics signals
from personal computers and workstations. Its 140 MSPS
encode rate capability and full power analog bandwidth of 300
MHz support resolutions up to SXGA (1280 × 1024 at 75 Hz).
The AD9985A includes a 140 MHz triple ADC with internal
1.25 V reference, a PLL, and programmable gain, offset, and
clamp control. The user provides only a 3.3 V power supply,
analog input, and horizontal sync (Hsync) and Coast signals.
Three-state CMOS outputs can be powered from 2.5 V to 3.3 V.
The AD9985A’s on-chip PLL generates a pixel clock from the
Hsync input. Pixel clock output frequencies range from 12 MHz
to 140 MHz. PLL clock jitter is 500 ps p-p typical at 140 MSPS.
When the Coast signal is presented, the PLL maintains its
output frequency in the absence of Hsync. A sampling phase
adjustment is provided. Data, Hsync, and clock output phase
relationships are maintained. The AD9985A also offers full sync
processing for composite sync and sync-on-green applications.
A clamp signal is generated internally or can be provided by the
user through the CLAMP input pin. This interface is fully
programmable via a 2-wire serial interface.
Fabricated in an advanced CMOS process, the AD9985A is
provided in a space-saving 80-lead LQFP surface-mount
Pb-free plastic package, and is specified over the –40°C to
+85°C temperature range.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone] © 2005 Analog Devices, Inc. All rights reserved.