AD8613_10 Datasheet, PDF (1/16 Pages) Analog Devices – Low Cost Micropower, Low Noise CMOS Rail-to-Rail, Input/Output Operational Amplifiers

Low Cost Micropower, Low Noise CMOS
Rail-to-Rail, Input/Output Operational Amplifiers
AD8613/AD8617/AD8619
FEATURES
Offset voltage: 2.2 mV maximum
Low input bias current: 1 pA maximum
Single-supply operation: 1.8 V to 5 V
Low noise: 22 nV/√Hz
Micropower: 50 μA/amplifier maximum over temperature
No phase reversal
Unity gain stable
Qualified for automotive applications
APPLICATIONS
Battery-powered instrumentation
Multipole filters
Current shunt sense
Sensors
ADC predrivers
DAC drivers/level shifters
Low power ASIC input or output amplifiers
GENERAL DESCRIPTION
The AD8613/AD8617/AD8619 are single, dual, and quad micro-
power, rail-to-rail input and output amplifiers that feature low
supply current, as well as low input voltage and current noise.
The parts are fully specified to operate from 1.8 V to 5 V single
supply, or ±0.9 V and ±2.5 V dual supply. The combination of low
noise, very low input bias currents, and low power consumption
make the AD8613/AD8617/AD8619 especially useful in
portable and loop-powered instrumentation.
The ability to swing rail-to-rail at both the input and output
enables designers to buffer CMOS ADCs, DACs, ASICs, and
other wide output swing devices in low power, single-supply
systems.
The AD8613 is available in a 5-lead SC70 package and a 5-lead
TSOT-23 package. The AD8617 is available in 8-lead MSOP,
8-lead SOIC, and 8-lead LFCSP packages. The AD8619 is available
in 14-lead TSSOP and 14-lead SOIC packages. The AD8617W
is qualified for automotive applications and is available in an
8-lead MSOP package and an 8-lead SOIC package.
PIN CONFIGURATIONS
OUT 1 _AD8613 5 V+
V– 2 ^{TOP VIEW}
(Not to Scale)
+IN 3
4 –IN
Figure 1. 5-Lead SC70 and 5-Lead TSOT-23
OUT A 1
–IN A 2
+IN A 3
V– 4
AD8617
TOP VIEW
(Not to Scale)
8 V+
7 OUT B
6 –IN B
5 +IN B
Figure 2. 8-Lead MSOP and 8-Lead SOIC_N
OUT A 1
–IN A 2
+IN A 3
V– 4
AD8617
TOP VIEW
(Not to Scale)
8 V+
7 OUT B
6 –IN B
5 +IN B
NOTES
1. PIN 4 AND THE EXPOSED PAD
MUST BE CONNECTED TO V–.
Figure 3. 8-Lead LFCSP_VD
OUT A 1
–IN A 2
+IN A 3
V+ 4
+IN B 5
–IN B 6
OUT B 7
14 OUT D
13 –IN D
AD8619
TOP VIEW
(Not to Scale)
12 +IN D
11 V–
10 +IN C
9 –IN C
8 OUT C
Figure 4. 14-Lead TSSOP
OUT A 1
14 OUT D
–IN A 2
13 –IN D
+IN A 3 _AD8619 12 +IN D
V+ 4 TOP VIEW 11 V–
+IN B 5 ^{(Not to Scale)} 10 +IN C
–IN B 6
9 –IN C
OUT B 7
8 OUT C
Figure 5. 14-Lead SOIC_N
Rev. E
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone] ©2005–2010 Analog Devices, Inc. All rights reserved.