AD8565_06 Datasheet, PDF (1/16 Pages) Analog Devices – 16 V Rail-to-Rail Operational Amplifiers

FEATURES
Single-supply operation: 4.5 V to 16 V
Input capability beyond the rails
Rail-to-rail output swing
Continuous output current: 35 mA
Peak output current: 250 mA
Offset voltage: 10 mV
Slew rate: 6 V/μs
Unity gain stable with large capacitive loads
Supply current: 700 μA per amplifier
APPLICATIONS
LCD reference drivers
Portable electronics
Communications equipment
GENERAL DESCRIPTION
The AD8565, AD8566, and AD8567 are low cost, single-supply,
rail-to-rail input and output operational amplifiers optimized
for LCD monitor applications. They are built on an advanced
high voltage CBCMOS process. The AD8565 contains a single
amplifier, the AD8566 has two amplifiers, and the AD8567 has
four amplifiers.
These LCD op amps have high slew rates, 35 mA continuous
output drive, 250 mA peak output drive, and a high capacitive
load drive capability. They have a wide supply range and offset
voltages below 10 mV. The AD8565, AD8566, and AD8567 are
ideal for LCD grayscale reference buffer and VCOM applications.
The AD8565, AD8566, and AD8567 are specified over the
−40°C to +85°C temperature range. The AD8565 single is
available in a 5-lead SC70 package. The AD8566 dual is
available in an 8-lead MSOP package. The AD8567 quad is
available in a 14-lead TSSOP package and a 16-lead LFCSP
package.
16 V Rail-to-Rail
Operational Amplifiers
AD8565/AD8566/AD8567
PIN CONFIGURATIONS
AD8565
OUT 1
5 V–
V+ 2
+IN 3
4 –IN
TOP VIEW
(Not to Scale)
Figure 1. 5-Lead SC70 Pin Configuration
OUT A 1
AD8566 _{8 V+}
–IN A 2
7 OUT B
+IN A 3
6 –IN B
V– 4
TOP VIEW
5 +IN B
(Not to Scale)
Figure 2. 8-Lead MSOP Pin Configuration
OUT A 1
14 OUT D
–IN A 2
13 –IN D
+IN A 3
V+ 4
AD8567
TOP VIEW
(Not to Scale)
12 +IN D
11 V–
+IN B 5
10 +IN C
–IN B 6
9 –IN C
OUT B 7
8 OUT C
Figure 3. 14-Lead TSSOP Pin Configuration
16 15 14 13
–IN A ¹
12 –IN D
+IN A 2 ^AD8567 11 +IN D
TOP VIEW
V+ 3 _{(Not to Scale)} 10 V–
+IN B ⁴
9 +IN C
5678
NC = NO CONNECT
Figure 4. 16-Lead LFCSP Pin Configuration
Rev. D
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone]
©2006 Analog Devices, Inc. All rights reserved.