AD8500_15 Datasheet, PDF (1/12 Pages) Analog Devices – Micropower Precision CMOS Operational Amplifier

FEATURES
Supply current: 1 μA maximum
Offset voltage: 1 mV maximum
Single-supply or dual-supply operation
Rail-to-rail input and output
No phase reversal
Unity gain stable
APPLICATIONS
Portable equipment
Remote sensors
Low power filters
Threshold detectors
Current sensing
GENERAL DESCRIPTION
The AD8500 is a low power, precision CMOS op amp featuring
a maximum supply current of 1 μA. The AD8500 has a maximum
offset voltage of 1 mV and a typical input bias current of 1 pA; it
operates rail-to-rail on both the input and output. The AD8500
can operate from a single-supply voltage of +1.8 V to +5.5 V or
a dual-supply voltage of ±0.9 V to ±2.75 V.
With its low power consumption, low input bias current, and
rail-to-rail input and output, the AD8500 is ideally suited for
a variety of battery-powered portable applications. Potential
applications include ECGs, pulse monitors, glucose meters,
smoke and fire detectors, vibration monitors, and backup
battery sensors.
Micropower Precision CMOS
Operational Amplifier
AD8500
PIN CONFIGURATION
OUT A 1
5 V+
AD8500
V– 2 _{TOP VIEW}
(Not to Scale)
+IN 3
4 –IN
Figure 1. 5-Lead SC70
The ability to swing rail-to-rail at both the input and output
helps maximize dynamic range and signal-to-noise ratio in
systems that operate at very low voltages. The low offset voltage
allows the AD8500 to be used in systems with high gain without
having excessively large output offset errors, and it provides
high accuracy without the need for system calibration.
The AD8500 is fully specified over the industrial temperature
range (−40°C to +85°C) and is operational over the extended
industrial temperature range (−40°C to +125°C). It is available
in a 5-lead, SC70 surface-mount package.
Table 1. Low Supply Current Op Amps
Supply Current
1 μA
10 μA
Single
AD8500
Dual
AD8502 ADA4505-2
Quad
AD8504 ADA4505-4
20 μA
AD8506
AD8508
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone] ©2006–2009 Analog Devices, Inc. All rights reserved.