AD8383 Datasheet, PDF (1/16 Pages) Analog Devices – Low Cost 10-Bit, 6-Channel Output Decimating LCD DecDriver

Low Cost 10-Bit, 6-Channel Output
Decimating LCD DecDriver^®
AD8383
FEATURES
High voltage drive to within 1.3 V of supply rails
Output short-circuit protection
High update rates
Fast, 100 Ms/s, 10-bit input data update rate
Low static power dissipation: 0.7 W
Includes STBY function
Voltage-controlled video reference (brightness) and
full-scale (contrast) output levels
INV bit reverses polarity of video signal
3.3 V logic, 9 V to 18 V analog supplies
High accuracy voltage outputs
Laser trimming eliminates the need for adjustments
Flexible logic
STSQ/XFR allow parallel AD8383 operation at various
resolutions
Fast settling into capacitive loads
30 ns settling time to 0.25% into 150 pF load
Slew rate 460 V/µs
Available in 48-lead 7 mm × 7 mm LFCSP package
APPLICATIONS
LCD analog column driver
PRODUCT DESCRIPTION
The AD8383 provides a fast, 10-bit latched decimating digital
input that drives six high voltage outputs. 10-bit input words are
sequentially loaded into six separate, high speed, bipolar DACs.
Flexible digital input format allows several AD8383s to be used
in parallel for higher resolution displays. STSQ synchronizes
sequential input loading, XFR controls synchronous output
updating, and R/L controls the direction of loading as either
left-to-right or right-to-left. Six channels of high voltage output
drivers drive to within 1.3 V of the rail. For maximum flexibility,
the output signal can be adjusted for dc reference, signal
inversion.
FUNCTIONAL BLOCK DIAGRAM
10
DB(0:9)
10 10 _2-STAGE 10 _DAC
LATCH
AD8383
10 _2-STAGE 10 _DAC
LATCH
STBY
BYP
BIAS
10 _2-STAGE 10 _DAC
LATCH
10 _2-STAGE 10 _DAC
LATCH
R/L
E/O
CLK
STSQ
XFR
10 _2-STAGE 10 _DAC
LATCH
SEQUENCE
CONTROL
10 _2-STAGE 10 _DAC
LATCH
SCALING
CONTROL
VREFHI VREFLO
INV V1 V2
Figure 1
VID0
VID1
VID2
VID3
VID4
VID5
The AD8383 is fabricated on the 26 V, fast bipolar XFHV
process developed by Analog Devices, Inc. This process
provides fast input logic, bipolar DACs with trimmed accuracy
and fast settling, high voltage, precision drive amplifiers on the
same chip.
The AD8383 dissipates 0.7 W nominal static power. The STBY
pin reduces power to a minimum with fast recovery.
The AD8383 is offered in a 48-lead, 7 mm × 7 mm × 0.85 mm
LFCSP package and operates over the commercial temperature
range of 0°C to 85°C.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone] © 2004 Analog Devices, Inc. All rights reserved.