AD8326_15 Datasheet, PDF (1/24 Pages) Analog Devices – High Output Power Programmable CATV Line Driver

a
High Output Power
Programmable CATV Line Driver
AD8326
FEATURES
FUNCTIONAL BLOCK DIAGRAM
Supports DOCSIS Standard for Reverse Path
Transmission
V_CC (7 PINS)
BYP
Gain Programmable in 0.75 dB Steps over a 53.5 dB Range
AD8326
Low Distortion at 65 dBmV Output
–62 dBc SFDR at 21 MHz
V_IN+
DIFF OR
V_OUT+
–58 dBc SFDR at 65 MHz
SINGLE
INPUT
VERNIER
ATTENUATION
CORE
POWER
AMP
1 dB Compression of 25 dBm at 10 MHz
Output Noise Level
–45 dBmV in 160 kHz
Maintains 75 ⍀ Output Impedance
Power-Up and Power-Down Condition
Upper Bandwidth: 100 MHz (Full Gain Range)
E _{Single or Dual Supply Operation}
APPLICATIONS
Gain-Programmable Line Driver
T _{CATV Telephony Modems}
CATV Terminal Devices
General-Purpose Digitally Controlled Variable Gain Block
LE _{GENERAL DESCRIPTION}
The AD8326 is a high-output power, digitally controlled, vari-
able gain amplifier optimized for coaxial line driving applications
O ^{such as data and telephony cable modems that are designed to}
the MCNS-DOCSIS upstream standard. An 8-bit serial word
determines the desired output gain over a 53.5 dB range result-
ing in gain changes of 0.75 dB/LSB. The AD8326 is offered in
S ^{two models, each optimized to support the desired output power}
and resulting performance.
The AD8326 comprises a digitally controlled variable attenuator
of 0 dB to –54 dB, that is preceded by a low noise, fixed-gain
B ^{buffer and is followed by a low distortion high-power amplifier.}
The AD8326 accepts a differential or single-ended input signal.
The output is designed to drive a 75 Ω load, such as coaxial
cable, although the AD8326 is capable of driving other loads.
O ^{When driving 67 dBm into a 75 Ω load, the AD8326ARP}
V_IN–
AMP
Z_IN (SINGLE) = 800⍀
Z_IN (DIFF) = 1.6k⍀
8
DECODE
Z_OUT DIFF =
75⍀
V_OUT–
8
DATA LATCH
POWER-DOWN
LOGIC
8
SHIFT
REGISTER
GND
DATEN DATA CLK V_EE (10 PINS) TXEN SLEEP
–40
ARP(V_S = +12V)
ARE(V_S = ؎5V)
–45
–50
ARP(V_O = 69dBmV)
–55
ARP(V_O = 67dBmV)
–60
–65 ^{ARE(VO = 65dBmV)}
–70
ARE(V_O = 62dBmV)
–75
–80
5
15
25
35
45
55
65
FREQUENCY – MHz
Figure 1. Worst Harmonic Distortion vs. Frequency
The differential output of the AD8326 is compliant with DOCSIS
paragraph 4.2.10.2 for “Spurious Emissions During Burst On/Off
Transients.” In addition, this device has a sleep mode function
that reduces the quiescent current to 4 mA.
provides a worst harmonic of only –59 dBc at 21 MHz and
–57 dBc at 42 MHz. When driving 65 dBmV into a 75 Ω load,
the AD8326ARE provides a worst harmonic of only –62 dBc at
21 MHz and –60 dBc at 42 MHz.
The AD8326 is packaged in a low-cost 28-lead TSSOP and a
28-lead P (power) SOIC. Both devices have an operational tem-
perature range of –40°C to +85°C.
REV. 0
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties that
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone]
© Analog Devices, Inc., 2001