|
AD8200_15 Datasheet, PDF (1/12 Pages) Analog Devices – High Common-Mode Voltage, Single-Supply Difference Amplifier | |||
|
High Common-Mode Voltage, Single-Supply
Difference Amplifier
AD8200
FEATURES
FUNCTIONAL BLOCK DIAGRAM
High Common-Mode Voltage Range â2 V to +24 V at a
SOIC (R) Package
5 V Supply Voltage
Die Form
Operating Temperature Range
Die: â40ØC to +150ØC
NC
A1 A2
+VS
Supply Voltage Range: 4.7 V to 12 V
Low-Pass Filter (One Pole or Two Pole)
AD8200
EXCELLENT AC AND DC PERFORMANCE
Ø1 mV Voltage Offset
Ø10 ppm/ØC Typ Gain Drift
80 dB CMRR Min DC to 10 kHz
PLATFORMS
E Transmission Control
Diesel Injection Control
Engine Management
T Adaptive Suspension Control
Vehicle Dynamics Control
+IN
âIN
200kâ
100kâ
G =Ø10
+IN
A1
âIN
200kâ
NC = NO CONNECT
G =Ø2
+IN
A2
âIN
10kâ
10kâ
OUT
GND
E GENERAL DESCRIPTION
The AD8200 is a single-supply difference amplifier for amplifying
and low-pass filtering small differential voltages in the presence of
a large common-mode voltage. The input CMV range extends
L from â2 V to +24 V at a typical supply voltage of 5 V.
The AD8200 is offered in die and packaged form. Both package
options are specified over wide temperature ranges, making the
AD8200 well suited for use in many automotive platforms. The
O SOIC package is specified over a temperature range of â40°C to
+125°C. The die is specified from â40°C to +150°C.
Automotive platforms demand precision components for better
system control. The AD8200 provides excellent ac and dc per-
formance that keeps errors to a minimum in the userâs system.
Typical offset and gain drift in the SOIC package are 6 µV/°C
and 10 ppm/°C, respectively. The device also delivers a mini-
mum CMRR of 80 dB from dc to 10 kHz.
The AD8200 features an externally accessible 100 k⦠resistor at
the output of the preamp A1, which can be used for low-pass
filter applications and for establishing gains other than 20.
BS BATTERY
CLAMP
DIODE
14V
4 TERM
SHUNT
INDUCTIVE
LOAD
5V
+IN NC +VS OUT
AD8200
OUTPUT
OPOWER
âIN GND A1 A2
BATTERY 14V
POWER
DEVICE
5V
+IN NC +VS OUT
OUTPUT
4 TERM
SHUNT
AD8200
âIN GND A1 A2
DEVICE
CLAMP
DIODE
INDUCTIVE
LOAD
COMMON
NC = NO CONNECT
Figure 1. High Line Current Sensor
COMMON
NC = NO CONNECT
Figure 2. Low Line Current Sensor
REV. B
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties that
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
www.analog.com
Fax: 781/326-8703 © 2003 Analog Devices, Inc. All rights reserved.
|
▷ |