AD8122 Datasheet, PDF (1/13 Pages) Analog Devices – Triple Differential Receiver

Preliminary Technical Data
Triple Differential Receiver with
300m Adjustable Line Equalization
AD8122
FEATURES
Compensates cables to 300 meters for wideband video
60 MHz Equalized BW @ 300 meters of UTP Cable
120 MHz Equalized BW @ 150 meters of UTP Cable
Fast time domain performance
70 ns settling time to 1% with 300 meters of UTP cable
7 ns rise/fall times with 2 V step @ 300 meters of UTP cable
Three frequency response gain adjustment pins
High frequency peaking adjustment (VPEAK)
Output lowpass filter cutoff adjustment (VFILTER)
Broadband flat gain adjustment (VGAIN)
Selectable for UTP or coax compensation
DC output offset adjust (VOFFSET)
Low output offset voltage: ±4 mV @ G = 1
Compensates both RGB and YPbPr
Two on-chip comparators with hysteresis
Can be used for common-mode sync extraction
Available in 40-lead, 6 mm × 6 mm LFCSP
APPLICATIONS
Keyboard-video-mouse (KVM)
Digital signage
RGB video over UTP cables
Professional video projection and distribution
HD video
Security video
GENERAL DESCRIPTION
The AD8122 is a triple, high speed, differential receiver and
equalizer that compensates for the transmission losses of UTP
and coaxial cables up to 300 meters in length. Various gain
stages are summed together to best approximate the inverse
frequency response of the cable. Each channel features a high
impedance differential input that is ideal for interfacing directly
with the cable.
The AD8122 has two control inputs for optimal cable
compensation, one LPF control input, an input to select
between UTP and coax cable, and an output offset adjust input.
The cable compensation inputs are used to compensate for
different cable lengths; the VPEAK input controls the amount of high
FUNCTIONAL BLOCK DIAGRAM
V _PEAK V_FILTER V _OFFSET V_GAIN
COAX/UTP
–IN_R
+IN_R
–IN_G
+IN_G
–IN_B
+IN_B
–IN_CMP1
+IN_CMP1
–IN_CMP2
+IN_CMP2
AD8122
OUT_R
GAIN _R
OUT_G
GAIN _G
OUT_B
GAIN _B
OUT_CMP1
OUT_CMP2
Figure 1.
frequency peaking and the VGAIN input adjusts the broadband
flat gain, which compensates for the flat cable loss. The VFILTER
input controls the cutoff frequency of output lowpass filters on
each channel. Selection between UTP and coaxial cable
compensation responses is determined by the binary
COAX/UTP input, which can be left floating in UTP
applications. The VOFFSET pin allows the dc voltage at the output
to be adjusted, which can be useful in dc-coupled systems.
For added flexibility, the gains of each channel can be set to x1
or x2 using the associated GAIN control pins.
The AD8122 is available in a 6 mm × 6 mm, 40-lead LFCSP and
is rated to operate over the extended temperature range of
−40°C to +85°C.
Rev. PrC
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone]
©2012 Analog Devices, Inc. All rights reserved.