AD8014ARZ Datasheet, PDF (1/11 Pages) Analog Devices – 400 MHz Low Power High Performance Amplifier

a
FEATURES
Low Cost
Low Power: 1.15 mA Max for 5 V Supply
High Speed
400 MHz, –3 dB Bandwidth (G = +1)
4000 V/␮s Slew Rate
60 ns Overload Recovery
Fast Settling Time of 24 ns
Drive Video Signals on 50 ⍀ Lines
Very Low Noise
3.5 nV/√Hz and 5 pA/√Hz
5 nV/√Hz Total Input Referred Noise @ G = +3 w/500 ⍀
Feedback Resistor
Operates on +4.5 V to +12 V Supplies
Low Distortion –70 dB THD @ 5 MHz
Low, Temperature-Stable DC Offset
Available in SOIC-8 and SOT-23-5
APPLICATIONS
Photo-Diode Preamp
Professional and Portable Cameras
Hand Sets
DVD/CD
Handheld Instruments
A-to-D Driver
Any Power-Sensitive High Speed System
PRODUCT DESCRIPTION
The AD8014 is a revolutionary current feedback operational
amplifier that attains new levels of combined bandwidth, power,
output drive and distortion. Analog Devices, Inc. uses a propri-
etary circuit architecture to enable the highest performance
amplifier at the lowest power. Not only is it technically superior,
but is low priced, for use in consumer electronics. This general
purpose amplifier is ideal for a wide variety of applications
including battery operated equipment.
400 MHz Low Power
High Performance Amplifier
AD8014
FUNCTIONAL BLOCK DIAGRAMS
SOIC-8 (R)
SOT-23-5 (RT)
NC 1
–IN 2
+IN 3
–V_S ⁴
AD8014
8 NC
7 ^+VS
6 ^VOUT
5 NC
NC = NO CONNECT
V_OUT 1
AD8014
5 +V_S
–V_S 2
+IN 3
4 –IN
The AD8014 is a very high speed amplifier with 400 MHz,
–3 dB bandwidth, 4000 V/µs slew rate, and 24 ns settling time.
The AD8014 is a very stable and easy to use amplifier with fast
overload recovery. The AD8014 has extremely low voltage and
current noise, as well as low distortion, making it ideal for use
in wide-band signal processing applications.
For a current feedback amplifier, the AD8014 has extremely
low offset voltage and input bias specifications as well as low
drift. The input bias current into either input is less than 15 µA
at +25°C with a typical drift of less than 50 nA/°C over the
industrial temperature range. The offset voltage is 5 mV max
with a typical drift less than 10 µV/°C.
For a low power amplifier, the AD8014 has very good drive
capability with the ability to drive 2 V p-p video signals on
75 Ω or 50 Ω series terminated lines and still maintain more
than 135 MHz, 3 dB bandwidth.
Rev. C
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone]
© Analog Devices, Inc., 2010