AD8011 Datasheet, PDF (1/16 Pages) Analog Devices – 300 MHz, 1 mA Current Feedback Amplifier

a
300 MHz, 1 mA
Current Feedback Amplifier
AD8011*
FEATURES
Easy to Use
Low Power
1 mA Power Supply Current (5 mW on +5 V_S)
High Speed and Fast Settling on +5 V
300 MHz, –3 dB Bandwidth (G = +1)
180 MHz, –3 dB Bandwidth (G = +2)
2000 V/␮s Slew Rate
29 ns Settling Time to 0.1%
Good Video Specifications (R_L = 1 k⍀, G = +2)
Gain Flatness 0.1 dB to 25 MHz
0.02% Differential Gain Error
0.06؇ Differential Phase Error
Low Distortion
–70 dBc Worst Harmonic @ 5 MHz
–62 dBc Worst Harmonic @ 20 MHz
Single Supply Operation
Fully Specified for +5 V Supply
APPLICATIONS
Power Sensitive, High Speed Systems
Video Switchers
Distribution Amplifiers
A-to-D Driver
Professional Cameras
CCD Imaging Systems
Ultrasound Equipment (Multichannel)
PRODUCT DESCRIPTION
The AD8011 is a very low power, high-speed amplifier designed
to operate on +5 V or ±5 V supplies. With wide bandwidth, low
distortion and low power, this device is ideal as a general-purpose
FUNCTIONAL BLOCK DIAGRAM
8-Lead Plastic DIP and SOIC
NC 1
–IN 2
+IN 3
V– ⁴
AD8011
8 NC
7 ^V+
6 OUT
5 NC
NC = NO CONNECT
amplifier. It also can be used to replace high-speed amplifiers
consuming more power. The AD8011 is a current feedback
amplifier and features gain flatness of 0.1 dB to 25 MHz while
offering differential gain and phase error of 0.02% and 0.06° on
a single +5 V supply. This makes the AD8011 ideal for profes-
sional video electronics such as cameras, video switchers or any
high speed portable equipment. Additionally, the AD8011’s
low distortion and fast settling make it ideal for buffering high
speed 8-, 10-, 12-bit A-to-D converters.
The AD8011 offers very low power of 1 mA max and can run
on single +5 V to +12 V supplies. All this is offered in a small
8-lead plastic DIP or 8-lead SOIC package. These features fit
well with portable and battery-powered applications where size
and power are critical.
The AD8011 is available in the industrial temperature range of –
40°C to +85°C.
+5
G = +2
+4 _{RF = 1k⍀}
+3 ^{VS = +5V OR ؎5V}
V_OUT = 200mV p-p
+2
+1
0
–1
–2
–3
–4
–5
1
10
100
500
FREQUENCY – MHz
Figure 1. Frequency Response; G = +2, V_S = +5 V or ±5 V
*Protected under Patent Number 5,537,079.
REV. B
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
–40
G = +2
–60
3rd
R_L = 150⍀
2nd
R_L = 150⍀
–80
3rd
R_L =1k⍀
2nd
R_L = 1k⍀
–100
10
20
FREQUENCY – MHz
Figure 2. Distortion vs. Frequency; V_S = ±5 V
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone] World Wide Web Site: http://www.analog.com
Fax: [phone]
© Analog Devices, Inc., 2000