AD7904_15 Datasheet, PDF (1/32 Pages) Analog Devices – 4-Channel, 1 MSPS, 8-/10-/12-Bit ADCs with Sequencer in 16-Lead TSSOP

Data Sheet
4-Channel, 1 MSPS, 8-/10-/12-Bit ADCs
with Sequencer in 16-Lead TSSOP
AD7904/AD7914/AD7924
FEATURES
Fast throughput rate: 1 MSPS
Specified for AVDD of 2.7 V to 5.25 V
Low power:
6 mW maximum at 1 MSPS with 3 V supplies
13.5 mW maximum at 1 MSPS with 5 V supplies
4 single-ended inputs with sequencer
Wide input bandwidth
AD7924, 70 dB SNR at 50 kHz input frequency
Flexible power/serial clock speed management
No pipeline delays
High speed serial interface: SPI/QSPI™/
MICROWIRE™/DSP compatible
Shutdown mode: 0.5 µA maximum
16-lead TSSOP package
Qualified for automotive applications
GENERAL DESCRIPTION
The AD7904/AD7914/AD7924 are, respectively, 8-bit, 10-bit, and
12-bit, high speed, low power, 4-channel successive approxi-
mation ADCs. The parts operate from a single 2.7 V to 5.25 V
power supply and feature throughput rates up to 1 MSPS. The
parts contain a low noise, wide bandwidth track-and-hold
amplifier that can handle input frequencies in excess of 8 MHz.
The conversion process and data acquisition are controlled using
CS and the serial clock signal, allowing the device to easily inter-
face with microprocessors or DSPs. The input signal is sampled
on the falling edge of CS and conversion is initiated at this
point. There are no pipeline delays associated with the part.
The AD7904/AD7914/AD7924 use advanced design techniques
to achieve very low power dissipation at maximum throughput
rates. At maximum throughput rates, the AD7904/AD7914/
AD7924 consume 2 mA maximum with 3 V supplies; with 5 V
supplies, the current consumption is 2.7 mA maximum.
Through the configuration of the control register, the analog
input range for the part can be selected as 0 V to REFIN or 0 V to
2 × REFIN, with either straight binary or twos complement output
coding. The AD7904/AD7914/AD7924 each feature four single-
ended analog inputs with a channel sequencer to allow a pre-
programmed selection of channels to be converted sequentially.
The conversion time for the AD7904/AD7914/AD7924 is
determined by the SCLK frequency, which is also used as the
master clock to control the conversion.
Rev. C
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
REF_IN
V_IN0
V_IN1
V_IN2
FUNCTIONAL BLOCK DIAGRAM
AV_DD
T/H
I/P
MUX
8-/10-/12-BIT
SUCCESSIVE
APPROXIMATION
ADC
V_IN3
SEQUENCER
CONTROL LOGIC
AD7904/AD7914/AD7924
SCLK
DOUT
DIN
CS
V_DRIVE
AGND
Figure 1.
PRODUCT HIGHLIGHTS
1. High Throughput with Low Power Consumption.
The AD7904/AD7914/AD7924 offer throughput rates
up to 1 MSPS. At the maximum throughput rate with 3 V
supplies, the AD7904/AD7914/AD7924 dissipate only
6 mW of power maximum.
2. Four Single-Ended Inputs with Channel Sequencer.
A consecutive sequence of channels can be selected,
through which the ADC will cycle and convert on.
3. Single-Supply Operation with VDRIVE Function.
The AD7904/AD7914/AD7924 operate from a single 2.7 V
to 5.25 V supply. The VDRIVE function allows the serial inter-
face to connect directly to 3 V or 5 V processor systems,
independent of VDD.
4. Flexible Power/Serial Clock Speed Management.
The conversion rate is determined by the serial clock,
allowing the conversion time to be reduced by increasing
the serial clock speed. The parts also feature two shutdown
modes to maximize power efficiency at lower throughput
rates. Current consumption is 0.5 µA maximum when in
full shutdown.
5. No Pipeline Delay.
The parts feature a standard successive approximation
ADC with accurate control of the sampling instant via
the CS input and once-off conversion control.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone] ©2002–2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com