AD7814 Datasheet, PDF (1/8 Pages) Analog Devices – 10-Bit Digital Temperature Sensor in 6-Lead SOT-23

a
FEATURES
10-Bit Temperature-to-Digital Converter
–55؇C to +125؇C Operating Temperature Range
؎2؇C Accuracy
SPI- and DSP-Compatible Serial Interface
Shutdown Mode
Space-Saving SOT-23 Package
APPLICATIONS
Hard Disk Drives
Personal Computers
Electronic Test Equipment
Office Equipment
Domestic Appliances
Process Control
10-Bit Digital Temperature Sensor
in 6-Lead SOT-23
AD7814
FUNCTIONAL BLOCK DIAGRAM
GND
BAND GAP
TEMPERATURE
SENSOR
AD7814
10-BIT
ANALOG/DIGITAL
CONVERTER
TEMPERATURE
VALUE
REGISTER
SERIAL
BUS
INTERFACE
V_DD
CS
SCLK
DIN
DOUT
GENERAL DESCRIPTION
The AD7814 is a complete temperature monitoring system in a
SOT-23 package or 8-lead MSOP package. It contains a band
gap temperature sensor and 10-bit ADC to monitor and digitize
the temperature reading to a resolution of 0.25°C.
The AD7814 has a flexible serial interface that allows easy inter-
facing to most microcontrollers. The interface is compatible
with SPI^®, QSPI™, and MICROWIRE™ protocol, and is also
compatible with DSPs. The part features a standby mode that is
controlled via the serial interface.
The AD7814’s wide supply voltage range, low supply current,
and SPI-compatible interface make it ideal for a variety of
applications, including personal computers, office equipment,
and domestic appliances.
PRODUCT HIGHLIGHTS
1. The AD7814 has an on-chip temperature sensor that allows
an accurate measurement of the ambient temperature. The
measurable temperature range is –55°C to +125°C, with a
± 2°C temperature accuracy.
2. Supply voltage of 2.7 V to 5.5 V
3. Space-saving 6-lead SOT-23 package and 8-lead MSOP
package
4. 10-bit temperature reading to 0.25°C resolution
5. Standby mode that reduces the current consumption to 1 µA
Purchase of licensed I²C components of Analog Devices or one of its sublicensed
Associated Companies conveys a license for the purchaser under the Philips I ²C
Patent Rights to use these components in an I²C system, provided that the system
conforms to the I²C Standard Specification as defined by Philips.
REV. E
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties that
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone] © 2004 Analog Devices, Inc. All rights reserved.