AD7791_15 Datasheet, PDF (1/20 Pages) Analog Devices – Low Power, Buffered 24-Bit Sigma-Delta ADC

Data Sheet
FEATURES
Power
Supply: 2.5 V to 5.25 V operation
Normal: 75 μA max
Power-down: 1 μA max
RMS noise: 1.1 μV at 9.5 Hz update rate
19.5-bit p-p resolution (22 bits effective resolution)
Integral nonlinearity: 3.5 ppm typical
Simultaneous 50 Hz and 60 Hz rejection
Internal clock oscillator
Rail-to-rail input buffer
VDD monitor channel
Temperature range: –40°C to +105°C
10-lead MSOP
INTERFACE
3-wire serial
SPI®, QSPI™, MICROWIRE™, and DSP compatible
Schmitt trigger on SCLK
APPLICATIONS
Smart transmitters
Battery applications
Portable instrumentation
Sensor measurement
Temperature measurement
Pressure measurement
Weigh scales
4 to 20 mA loops
Low Power, Buffered 24-Bit
Sigma-Delta ADC
AD7791
FUNCTIONAL BLOCK DIAGRAM
GND V_DD REFIN(+) REFIN(–)
V_DD
CLOCK
AIN(+)
AIN(–)
GND
BUF
-
ADC
AD7791
Figure 1.
SERIAL
INTERFACE
DOUT/RDY
DIN
SCLK
CS
04227-0-001
GENERAL DESCRIPTION
The AD7791 is a low power, complete analog front end for
low frequency measurement applications. It contains a low
noise 24-bit ∑-Δ ADC with one differential input that can be
buffered or unbuffered.
The device operates from an internal clock. Therefore, the user
does not have to supply a clock source to the device. The output
data rate from the part is software programmable and can be
varied from 9.5 Hz to 120 Hz, with the rms noise equal to
1.1 μV at the lower update rate. The internal clock frequency
can be divided by a factor of 2, 4, or 8, which leads to a reduc-
tion in the current consumption. The update rate, cutoff fre-
frequency, and settling time will scale with the clock frequency.
The part operates with a power supply from 2.5 V to 5.25 V.
When operating from a 3 V supply, the power dissipation for
the part is 225 μW maximum. It is housed in a 10-lead MSOP.
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no re-
sponsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone] ©2004–2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com