AD7699 Datasheet, PDF (1/28 Pages) Analog Devices – 16-Bit, 8-Channel, 500 kSPS PulSAR ADC

FEATURES
16-bit resolution with no missing codes
8-channel multiplexer with choice of inputs
Unipolar single-ended
Differential (GND sense)
Pseudobipolar
Throughput: 500 kSPS
INL: ±0.5 LSB typical, ±1.5 LSB maximum (±23 ppm or FSR)
Dynamic range: 93.3 dB
SINAD: 91.5 dB @ 20 kHz
THD: −97 dB @ 20 kHz
Analog input range: 0 V to V_REF with V_REF up to VDD
Multiple reference types
Internal 4.096 V
External buffered (up to 4.096 V)
External (up to VDD)
Internal temperature sensor
Channel sequencer, selectable 1-pole filter, busy indicator
No pipeline delay, SAR architecture
Single-supply 5 V operation with
1.8 V to 5 V logic interface
Serial interface compatible with SPI, MICROWIRE,
QSPI, and DSP
Power dissipation
26 mW @ 500 kSPS
5.2 μW @ 100 SPS
Standby current: 50 nA
20-lead 4 mm × 4 mm LFCSP package
APPLICATIONS
Battery-powered equipment
Medical instruments: ECG/EKG
Mobile communications: GPS
Personal digital assistants
Power line monitoring
Data acquisition
Seismic data acquisition systems
Instrumentation
Process control
16-Bit, 8-Channel,
500 kSPS PulSAR ADC
AD7699
FUNCTIONAL BLOCK DIAGRAM
0.5V TO 4.096V
0.5V TO VDD
5V
0.1µF
10µF
REFIN
REF
VDD
BAND GAP
REF
IN0
IN1
IN2
IN3
IN4
IN5
IN6
IN7
COM
TEMP
SENSOR
AD7699
MUX
16-BIT SAR SPI SERIAL
ADC
INTERFACE
ONE-POLE
LPF
SEQUENCER
GND
1.8V
VIO _TO
VDD
CNV
SCK
SDO
DIN
Figure 1.
Table 1. Multichannel 14-/16-Bit PulSAR® ADC
Type
Channels 250 kSPS 500 kSPS ADC Driver
14-Bit 8
AD7949
ADA4841-x
16-Bit 4
AD7682
ADA4841-x
16-Bit 8
AD7689 AD7699 ADA4841-x
GENERAL DESCRIPTION
The AD7699 is an 8-channel, 16-bit, charge redistribution
successive approximation register (SAR) analog-to-digital
converter (ADC) that operates from a single power supply, VDD.
The AD7699 contains all components for use in a multichannel,
low power data acquisition system, including a true 16-bit SAR
ADC with no missing codes; an 8-channel low crosstalk multip-
lexer useful for configuring the inputs as single-ended (with or
without ground sense), differential, or bipolar; an internal 4.096 V
low drift reference and buffer; a temperature sensor; a selectable
one-pole filter; and a sequencer that is useful when channels are
continuously scanned in order.
The AD7699 uses a simple serial port interface (SPI) for writing
to the configuration register and receiving conversion results.
The SPI interface uses a separate supply, VIO, which is set to the
host logic level. Power dissipation scales with throughput.
The AD7699 is housed in a tiny 20-lead LFCSP with operation
specified from −40°C to +85°C.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone]
©2008 Analog Devices, Inc. All rights reserved.