AD7684BRMZ Datasheet, PDF (1/16 Pages) Analog Devices – 16-Bit, 100 kSPS PulSAR, Differential ADC in MSOP

FEATURES
16-bit resolution with no missing codes
Throughput: 100 kSPS
INL: ±1 LSB typical, ±3 LSB maximum
True differential analog input range: ±VREF
0 V to VREF with VREF up to VDD on both inputs
Single-supply operation: 2.7 V to 5.5 V
Serial interface SPI®-/QSPI-™/MICROWIRE-™/DSP-compatible
Power dissipation
4 mW @ 5 V
1.5 mW @ 2.7 V
150 μW @ 2.7 V/10 kSPS
Standby current: 1 nA
8-lead MSOP package
APPLICATIONS
Battery-powered equipment
Data acquisition
Instrumentation
Medical instruments
Process control
16-Bit, 100 kSPS PulSAR,
Differential ADC in MSOP
AD7684
APPLICATION DIAGRAM
0.5V TO VDD 2.7V TO 5.5V
V_REF
0
V_REF
0
REF
VDD
+IN
DCLOCK
–IN ^AD7684 DOUT
GND
CS
3-WIRE SPI
INTERFACE
Figure 1.
Table 1. MSOP, QFN (LFCSP)/SOT-23
14-/16-/18-Bit PulSAR ADC
Type
100
kSPS
250
kSPS
400 kSPS
to
500 kSPS
18-Bit True
AD7691 AD7690
Differential
16-Bit True AD7684 AD7687 AD7688
Differential
AD7693
16-Bit Pseudo AD7680 AD7685 AD7686
Differential AD7683 AD7694
14-Bit Pseudo AD7940 AD7942 AD7946
Differential
≥ 1000
kSPS
AD7982
AD7984
AD7980
ADC
Driver
ADA4941
ADA4841
ADA4941
ADA4841
ADA4841
ADA4841
GENERAL DESCRIPTION
The AD7684 is a 16-bit, charge redistribution, successive
approximation, PulSAR® analog-to-digital converter (ADC)
that operates from a single power supply, VDD, between 2.7 V
to 5.5 V. It contains a low power, high speed, 16-bit sampling
ADC with no missing codes, an internal conversion clock, and a
serial, SPI-compatible interface port. The part also contains a low
noise, wide bandwidth, short aperture delay, track-and-hold circuit.
On the CS falling edge, it samples the voltage difference
between +IN and –IN pins. The reference voltage, REF, is
applied externally and can be set up to the supply voltage. Its
power scales linearly with throughput.
The AD7684 is housed in an 8-lead MSOP, with an operating
temperature specified from −40°C to +85°C.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone] ©2004–2007 Analog Devices, Inc. All rights reserved.