AD7653_15 Datasheet, PDF (1/28 Pages) Analog Devices – 16-Bit 1 MSPS PulSAR Unipolar ADC with Reference

FEATURES
Throughput:
1 MSPS (Warp mode)
800 kSPS (Normal mode)
666 kSPS (Impulse mode)
16-bit resolution
Analog input voltage range: 0 V to 2.5 V
No pipeline delay
Parallel and serial 5 V/3 V interface
SPI®/QSPI^TM/MICROWIRE^TM/DSP compatible
Single 5 V supply operation
Power dissipation
92 mW typ @ 666 kSPS, 138 μW @ 1 kSPS without REF
128 mW typ @ 1 MSPS with REF
48-lead LQFP and 48-lead LFCSP packages
Pin-to-pin compatible with PulSAR ADCs
APPLICATIONS
Data acquisition
Instrumentation
Digital signal processing
Spectrum analysis
Medical instruments
Battery-powered systems
Process control
GENERAL DESCRIPTION
The AD7653 is a 16-bit, 1 MSPS, charge redistribution SAR
analog-to-digital converter that operates from a single 5 V
power supply. The part contains a high speed 16-bit sampling
ADC, internal conversion clock, internal reference, error
correction circuits, and both serial and parallel system interface
ports. It features a very high sampling rate mode (Warp), a fast
mode (Normal) for asynchronous conversion rate applications,
and a reduced power mode (Impulse) for low power applica-
tions where power is scaled with the throughput. The AD7653 is
fabricated using Analog Devices’ high performance, 0.6 micron
CMOS process, with correspondingly low cost. It is available in
a 48-lead LQFP and a tiny 48-lead LFCSP with operation
specified from –40°C to +85°C.
16-Bit 1 MSPS PulSAR^TM
Unipolar ADC with Reference
AD7653
FUNCTIONAL BLOCK DIAGRAM
REFBUFIN REF REFGND
DVDD DGND
AGND
AVDD
IN
INGND
PDREF
PDBUF
PD
RESET
AD7653
REF
SWITCHED
CAP DAC
SERIAL
PORT
16
CLOCK
PARALLEL
INTERFACE
CONTROL LOGIC AND
CALIBRATION CIRCUITRY
WARP IMPULSE CNVST
Figure 1.
OVDD
OGND
DATA[15:0]
BUSY
RD
CS
SER/PAR
OB/2C
BYTESWAP
02966-0-001
Table 1. PulSAR Selection
Type/kSPS
Pseudo-
Differential
True Bipolar
True
Differential
18-Bit
Multichannel/
Simultaneous
100–250
AD7651
AD7660/AD7661
AD7663
AD7675
AD7678
500–570
AD7650/AD7652
AD7664/AD7666
AD7665
AD7676
AD7679
AD7654
AD7655
800–
1000
AD7653
AD7667
AD7671
AD7677
AD7674
PRODUCT HIGHLIGHTS
1. Fast Throughput.
The AD7653 is a 1 MSPS, charge redistribution, 16-bit SAR
ADC with internal error correction circuitry.
2. Internal Reference.
The AD7653 has an internal reference with a typical
temperature drift of 7 ppm/°C.
3. Single-Supply Operation.
The AD7653 operates from a single 5 V supply. In Impulse
mode, its power dissipation decreases with the throughput.
4. Serial or Parallel Interface.
Versatile parallel or 2-wire serial interface arrangement is
compatible with both 3 V and 5 V logic.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone] © 2003 Analog Devices, Inc. All rights reserved.