AD7400_15 Datasheet, PDF (1/20 Pages) Analog Devices – Isolated Sigma-Delta Modulator

Data Sheet
FEATURES
10 MHz clock rate
Second-order modulator
16 bits no missing codes
±2 LSB INL typical at 16 bits
3.5 μV/°C maximum offset drift
On-board digital isolator
On-board reference
Low power operation: 18 mA maximum at 5.25 V
−40°C to +105°C operating range
16-lead SOIC package
Safety and regulatory approvals
UL recognition
5000 V rms for 1 minute per UL 1577
CSA Component Acceptance Notice #5A
VDE Certificate of Conformity
DIN V VDE V 0884-10 (VDE V 0884-10):2006-12
VIORM = 891 V peak
APPLICATIONS
AC motor controls
Data acquisition systems
A/D + opto-isolator replacements
Isolated Sigma-Delta Modulator
AD7400
GENERAL DESCRIPTION
The AD7400¹ is a second-order, sigma-delta (Σ-Δ) modulator
that converts an analog input signal to a high speed, 1-bit data
stream with on-chip digital isolation based on Analog Devices,
Inc. iCoupler® technology. The AD7400 operates from a 5 V
power supply and accepts a differential input signal of ±200 mV
(±320 mV full scale). The analog input is continuously sampled
by the analog modulator, eliminating the need for external
sample-and-hold circuitry. The input information is contained
in the output stream as a density of ones with a data rate of
10 MHz. The original information can be reconstructed with an
appropriate digital filter. The serial I/O can use a 5 V or a 3 V
supply (VDD2).
The serial interface is digitally isolated. High speed CMOS,
combined with monolithic air core transformer technology,
means the on-chip isolation provides outstanding performance
characteristics superior to alternatives such as optocoupler
devices. The part contains an on-chip reference. The AD7400 is
offered in a 16-lead SOIC and has an operating temperature
range of −40°C to +105°C.
An external clock version, AD7401, is also available.
1 _{Protected by U.S. Patents 5,952,849; 6,873,065; and 7,075,329.}
V_IN+
T/H
V_IN–
BUF
REF
FUNCTIONAL BLOCK DIAGRAM
V_DD1
Σ-∆ ADC
UPDATE
AD7400
WATCHDOG
ENCODE
DECODE
CONTROL LOGIC
UPDATE
ENCODE
WATCHDOG
DECODE
V_DD2
MDAT
MCLKOUT
GND₁
Figure 1.
GND₂
Rev. G
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone] ©2006–2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com