AD7366_07 Datasheet, PDF (1/28 Pages) Analog Devices – True Bipolar Input, Dual 1 μs, 12-/14-Bit, 2-Channel SAR ADCs

True Bipolar Input, Dual 1 μs,
12-/14-Bit, 2-Channel SAR ADCs
AD7366/AD7367
FEATURES
Dual 12-bit/14-bit, 2-channel ADC
True bipolar analog inputs
Programmable input ranges:
±10 V, ±5 V, 0 V to 10 V
±12 V with 3 V external reference
Throughput rate: 1 MSPS
Simultaneous conversion with read in less than 1μs
High analog input impedance
Low current consumption:
8.3 mA typical in normal mode
320nA typical in shutdown mode
AD7366
72 dB SNR at 50 kHz input frequency
12-bit no missing codes
AD7367
76 dB SNR at 50 kHz input frequency
14-bit no missing codes
Accurate on-chip reference: 2.5 V ±0.2%
–40°C to +85°C operation
High speed serial interface
SPI-/QSPI™-/MICROWIRE™-/DSP-compatible
iCMOS^® process technology
Available in a 24-lead TSSOP
GENERAL DESCRIPTION
The AD7366/AD7367¹ are dual, 12/14-bit, high speed, low
power, successive approximation analog-to-digital converters
(ADCs) that feature throughput rates up to 1 MSPS. The device
contains two ADCs, each preceded by a 2-channel multiplexer,
and a low noise, wide bandwidth track-and-hold amplifier.
The AD7366/AD7367 are fabricated on the Analog Devices,
Inc. industrial CMOS process (iCMOS®²), which is a technology
platform combining the advantages of low and high voltage
CMOS. The process allows the AD7366/AD7367 to accept high
voltage bipolar signals in addition to reducing power consump-
tion and package size. The AD7366/AD7367 can accept true
bipolar analog input signals in the ±10 V range, ±5 V range,
and 0 V to 10 V range.
The AD7366/AD7367 have an on-chip 2.5 V reference that
can be disabled to allow the use of an external reference. If a
3 V reference is applied to the DCAPA and DCAPB pins, the
AD7366/AD7367 can accept a true bipolar ±12 V analog input.
Minimum ±12 V VDD and VSS supplies are required for the
±12 V input range.
FUNCTIONAL BLOCK DIAGRAM
V_DD
D_CAPA
AV_CC
DV_CC
REF
V_A1
MUX
V_A2
V_B1
MUX
V_B2
BUF
AD7366/AD7367
T/H
T/H
BUF
12-/14-BIT
SUCCESSIVE
APPROXIMATION
ADC
OUTPUT
DRIVERS
CONTROL
LOGIC
12-/14-BIT
SUCCESSIVE
APPROXIMATION
ADC
OUTPUT
DRIVERS
D_OUTA
SCLK
CNVST
CS
BUSY
ADDR
RANGE0
RANGE1
REFSEL
V_DRIVE
D_OUTB
AGND AGND
V_SS D_CAPB
Figure 1.
DGND
PRODUCT HIGHLIGHTS
1. The AD7366/AD7367 can accept true bipolar analog input
signals, as well as ±10 V, ±5 V, ±12 V (with external refer-
ence), and 0 V to +10 V unipolar signals.
2. Two complete ADC functions allow simultaneous
sampling and conversion of two channels.
3. 1 MSPS serial interface; SPI-/QSPI-/DSP-/MICROWIRE-
compatible interface.
Table 1. Related Products
Device
AD7366
AD7366-5
AD7367
AD7367-5
Resolution
12-Bit
12-Bit
14-Bit
14-Bit
Throughput
Rate
1 MSPS
500 kSPS
1 MSPS
500 kSPS
Number of
Channels
Dual, 2-channel
Dual, 2-channel
Dual, 2-channel
Dual, 2-channel
1 _{Protected by U.S. Patent No. 6,731,232.}
2 _{iCMOS Process Technology. For analog systems designers within}
industrial/instrumentation equipment OEMs who need high performance
ICs at higher voltage levels, iCMOS is a technology platform that enables the
development of analog ICs capable of 30 V and operating at ±15 V supplies
while allowing dramatic reductions in power consumption and package size,
and increased ac and dc performance.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone]
©2007 Analog Devices, Inc. All rights reserved.