AD7356 Datasheet, PDF (1/18 Pages) Analog Devices – Differential Input, Dual, 5 MSPS, 12-Bit, SAR ADC

Preliminary Technical Data
FEATURES
Dual 12-bit SAR ADC
Simultaneous Sampling
Throughput rate: 5 MSPS Per Channel
Specified for VDD of 2.5 V
No latency to 12 bits
Power dissipation:
35 mW at 5 MSPS
On-chip reference:
2.048 V ± 0.5% max @ 25°C, 10ppm/°C
Dual conversion with read
High speed serial interface:
SPI®-/QSPI™-/MICROWIRE™-/DSP-compatible
−40°C to +125°C operation
Shutdown mode: 10 µA max
16-lead TSSOP package
GENERAL DESCRIPTION
The AD7356¹ is a dual, 12-bit, high speed, low power, successive
approximation ADC that operates from a single 2.5 V power supply
and features throughput rates up to 5 MSPS. The part contains two
ADCs, each preceded by a low noise, wide bandwidth track-and-
hold circuit that can handle input frequencies in excess of
200 MHz.
The conversion process and data acquisition use standard control
inputs allowing for easy interfacing to microprocessors or DSPs.
The input signal is sampled on the falling edge of CS; conversion is
also initiated at this point. The conversion time is determined by
the SCLK frequency.
The AD7356 uses advanced design techniques to achieve very low
power dissipation at high throughput rates. With 2.5 V supply and
a 5 MSPS throughput rate, the part consumes 14 mA typically. The
part also offers flexible power/throughput rate management when
operating in normal mode as the quiescent current consumption is
so low.
The analog input range for the parts is the differential common
mode +/- Vref/2. The AD7356 has an on-chip 2.048 V reference
that can be overdriven when an external reference is preferred.
The AD7356 is available in a 16-lead thin shrink small outline
package (TSSOP).
Differential Input, Dual,
5 MSPS, 12-Bit, SAR ADC
AD7356
FUNCTIONAL BLOCK DIAGRAM
Vdd
Vdrive
AD7356
VINA+
VINA-
12-BIT
T/H
SUCCESSIVE
APPROXIMATION
ADC
SDATAA
REF
BUF
BUF
CONTROL
LOGIC
SCLK
CS
VINB+
VINB-
12-BIT
SUCCESSIVE
T/H
APPROXIMATION
ADC
SDATAB
AGND AGND REFGND DGND
Figure 1.
PRODUCT HIGHLIGHTS
1. Two Complete ADC Functions Allow Simultaneous Sampling
and Conversion of Two Channels.
The conversion result of both channels is simultaneously
available on separate data lines or in succession on one data
line if only one serial port is available.
2. High Throughput with Low Power Consumption.
The AD7356 offers a 5 MSPS throughput rate with 35 mW
power consumption.
3. The parts feature two standard successive approximation
ADCs with accurate control of the sampling instant via a
CS input and once off conversion control.
1 _{Protected by U.S. Patent No. 6,681,332}
Rev. PrC
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone]
©2006 Analog Devices, Inc. All rights reserved.