AD7298-1 Datasheet, PDF (1/24 Pages) Analog Devices – 8-Channel, 1 MSPS, 10-Bit SAR ADC

FEATURES
10-bit SAR ADC
8 single-ended inputs
Channel sequencer functionality
Fast throughput of 1 MSPS
Analog input range: 0 V to 2.5 V
Temperature range: −40°C to +125°C
Specified for V_DD of 2.8 V to 3.6 V
Logic voltage V_DRIVE = 1.65 V to 3.6 V
Power-down current: <10 µA
Internal 2.5 V reference
Internal power-on reset
High speed serial interface SPI
20-lead LFCSP
8-Channel, 1 MSPS, 10-Bit SAR ADC
AD7298-1
FUNCTIONAL BLOCK DIAGRAM
V_DD
GND
V_REF
V_IN0
V_IN7
REF
BUF
INPUT
MUX
10-BIT
T/H
SUCCESSIVE
APPROXIMATION
ADC
AD7298-1
SEQUENCER
CONTROL
LOGIC
PD/RST
Figure 1.
SCLK
DOUT
DIN
CS
V_DRIVE
GENERAL DESCRIPTION
The AD7298-1 is a 10-bit, high speed, low power, 8-channel,
successive approximation ADC. The part operates from a single
3.3 V power supply and features throughput rates up to 1 MSPS.
The device contains a low noise, wide bandwidth track-and-hold
amplifier that can handle input frequencies in excess of 30 MHz.
The AD7298-1 offers a programmable sequencer, which enables
the selection of a preprogrammable sequence of channels for
conversion. The device has an on-chip, 2.5 V reference that can
be disabled to allow the use of an external reference.
The device offers a 4-wire serial interface compatible with SPI and
DSP interface standards.
The AD7298-1 uses advanced design techniques to achieve very
low power dissipation at high throughput rates. The part also
offers flexible power/throughput rate management options. The
part is offered in a 20-lead LFCSP package.
PRODUCT HIGHLIGHTS
1. Ideally Suited to Monitoring System Variables in a Variety
of Systems. This includes telecommunications, and process
and industrial control.
2. High Throughput Rate of 1 MSPS with Low Power
Consumption.
3. Eight Single-Ended Inputs with a Channel Sequencer. A
consecutive sequence of channels can be selected on which
the ADC cycles and converts.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone] ©2010–2011 Analog Devices, Inc. All rights reserved.