AD5762R_08 Datasheet, PDF (1/32 Pages) Analog Devices – Complete Dual, 16-Bit, High Accuracy, Serial Input, Bipolar Voltage Output DAC

Complete Dual, 16-Bit, High Accuracy,
Serial Input, Bipolar Voltage Output DAC
AD5762R
FEATURES
Complete dual, 16-bit digital-to-analog converter (DAC)
Programmable output range: ±10 V, ±10.2564 V, or ±10.5263 V
±1 LSB maximum INL error, ±1 LSB maximum DNL error
Low noise: 60 nV/√Hz
Settling time: 10 μs maximum
Integrated reference buffers
Internal reference: 10 ppm/°C maximum
On-chip die temperature sensor
Output control during power-up/brownout
Programmable short-circuit protection
Simultaneous updating via LDAC
Asynchronous CLR to zero code
Digital offset and gain adjust
Logic output control pins
DSP-/microcontroller-compatible serial interface
Temperature range: −40°C to +85°C
iCMOS process technology
APPLICATIONS
Industrial automation
Open-loop/closed-loop servo control
Process control
Data acquisition systems
Automatic test equipment
Automotive test and measurement
High accuracy instrumentation
GENERAL DESCRIPTION
The AD5762R is a dual, 16-bit, serial input, bipolar voltage output
DAC that operates from supply voltages of ±11.4 V to ±16.5 V.
Nominal full-scale output range is ±10 V. The AD5762R provides
integrated output amplifiers, reference buffers, and proprietary
power-up/power-down control circuitry. The part also features
a digital I/O port, programmed via the serial interface, and an
analog temperature sensor. The part incorporates digital offset
and gain adjust registers per channel.
The AD5762R is a high performance converter that provides
guaranteed monotonicity, integral nonlinearity (INL) of ±1 LSB,
low noise, and 10 μs settling time. The AD5762R includes an
on-chip 5 V reference with a reference temperature coefficient
of 10 ppm/°C maximum. During power-up when the supply
voltages are changing, VOUTx is clamped to 0 V via a low
impedance path.
The AD5764R is based on the iCMOS® technology platform, which
is designed for analog systems designers within industrial/instru-
mentation equipment OEMs who need high performance ICs at
higher voltage levels. iCMOS enables the development of analog
ICs capable of 30 V and operation at ±15 V supplies, while allowing
reductions in power consumption and package size, coupled with
increased ac and dc performance.
The AD5762R uses a serial interface that operates at clock rates
of up to 30 MHz and is compatible with DSP and microcontroller
interface standards. Double buffering allows the simultaneous
updating of all DACs. The input coding is programmable to either
twos complement or offset binary formats. The asynchronous
clear function clears all DAC registers to either bipolar zero or
zero scale, depending on the coding used. The AD5762R is ideal
for both closed-loop servo control and open-loop control appli-
cations. The AD5762R is available in a 32-lead TQFP and offers
guaranteed specifications over the −40°C to +85°C industrial
temperature range (see Figure 1 for the functional block diagram).
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone]
©2008 Analog Devices, Inc. All rights reserved.