AD5697R Datasheet, PDF (1/28 Pages) Analog Devices – Dual, 12-Bit nanoDAC+ with 2 ppm/°C Reference, I2C Interface

Data Sheet
Dual, 12-Bit nanoDAC+
with 2 ppm/°C Reference, I²C Interface
AD5697R
FEATURES
Low drift 2.5 V reference: 2 ppm/°C typical
Tiny package: 3 mm × 3 mm, 16-lead LFCSP
Total unadjusted error (TUE): ±0.1% of full-scale range (FSR)
maximum
Offset error: ±1.5 mV maximum
Gain error: ±0.1% of FSR maximum
High drive capability: 20 mA, 0.5 V from supply rails
User selectable gain of 1 or 2 (GAIN pin)
Reset to zero scale or midscale (RSTSEL pin)
1.8 V logic compatibility
Low glitch: 0.5 nV-sec
400 kHz I²C-compatible serial interface
Robust 3.5 kV HBM and 1.5 kV FICDM ESD rating
Low power: 3.3 mW at 3 V
2.7 V to 5.5 V power supply
−40°C to +105°C temperature range
APPLICATIONS
Base station power amplifiers
Process controls (programmable logic controller [PLC] I/O cards)
Industrial automation
Data acquisition systems
GENERAL DESCRIPTION
The AD5697R, a member of the nanoDAC+™ family, is a low power,
dual, 12-bit buffered voltage output digital-to-analog converter
(DAC). The device includes a 2.5 V, 2 ppm/°C internal reference
(enabled by default) and a gain select pin giving a full-scale output
of 2.5 V (gain = 1) or 5 V (gain = 2). The AD5697R operates from
a single 2.7 V to 5.5 V supply, is guaranteed monotonic by design,
and exhibits less than 0.1% FSR gain error and 1.5 mV offset
error performance. The device is available in a 3 mm × 3 mm
LFCSP and a TSSOP package.
The AD5697R also incorporates a power-on reset circuit and a
RSTSEL pin that ensure that the DAC outputs power up to zero
scale or midscale and remain there until a valid write takes
place. It contains a per channel power-down feature that reduces
the current consumption of the device to 4 µA at 3 V while in
power-down mode.
The AD5697R uses a versatile 2-wire serial interface that operates
at clock rates up to 400 kHz and includes a VLOGIC pin intended
for 1.8 V/3 V/5 V logic.
FUNCTIONAL BLOCK DIAGRAM
V_DD
GND
V_REF
V_LOGIC
SCL
AD5697R
SDA
INPUT
REGISTER
A1
INPUT
REGISTER
A0
2.5V
REFERENCE
DAC
REGISTER
STRING
DAC A
DAC
STRING
REGISTER DAC B
BUFFER
BUFFER
V_OUTA
V_OUTB
LDAC RESET
POWER-ON
RESET
GAIN =
×1/×2
RSTSEL
GAIN
Figure 1.
POWER-
DOWN
LOGIC
Table 1. Dual nanoDAC+ Devices
Interface
Reference
16-Bit
SPI
Internal
AD5689R
External
AD5689
I²C
Internal
External
12-Bit
AD5687R
AD5687
AD5697R
PRODUCT HIGHLIGHTS
1. Precision DC Performance.
TUE: ±0.1% of FSR maximum
Offset error: ±1.5 mV maximum
Gain error: ±0.1% of FSR maximum
2. Low Drift 2.5 V On-Chip Reference.
2 ppm/°C typical temperature coefficient
5 ppm/°C maximum temperature coefficient
3. Two Package Options.
3 mm × 3 mm, 16-lead LFCSP
16-lead TSSOP
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
©2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com