AD5626 Datasheet, PDF (1/20 Pages) Analog Devices – 5V,12-Bit nanoDAC, Serial Interface in MSOP and LFCSP Packages

FEATURES
8-lead MSOP and 8-lead LFCSP packages
Complete voltage output with internal reference
1 mV/bit with 4.095 V full scale
5 V single-supply operation
No external components required
3-wire serial interface, 20 MHz data loading rate
Low power: 2.5 mW
APPLICATIONS
Portable instrumentation
Digitally controlled calibration
Servo controls
Process control equipment
PC peripherals
5 V, 12-Bit nanoDAC, Serial Interface
in MSOP and LFCSP Packages
AD5626
GENERAL DESCRIPTION
The AD5626, a member of the nanoDAC® family, is a complete
serial input, 12-bit, voltage output digital-to-analog converter
(DAC) designed to operate from a single 5 V supply. It contains
the DAC, input shift register and latches, reference, and a rail-
to-rail output amplifier. The AD5626 monolithic DAC offers
the user low cost and ease of use in 5 V only systems.
Coding for the AD5626 is natural binary with the MSB loaded
first. The output op amp can swing to either rail and is set to a
range of 0 V to 4.095 V for a one-millivolt-per-bit resolution. It
is capable of sinking and sourcing 5 mA. An on-chip reference
is laser trimmed to provide an accurate full-scale output voltage
of 4.095 V.
This part features a serial interface that is high speed, three-
wire, DSP compatible with data in (SDIN), clock (SCLK), and
load strobe (LDAC). There is also a chip-select pin for
connecting multiple DACs.
The CLR input sets the output to zero scale at power on or upon
user demand.
The AD5626 is specified over the extended industrial tempera-
ture range (–40°C to +85°C). The AD5626 is available in MSOP
and LFCSP surface-mount packages.
FUNCTIONAL BLOCK DIAGRAM
V_DD
AD5626
REF
LDAC
CLR
DAC REGISTER
12-BIT DAC
OUTPUT
BUFFER
V_OUT
INPUT
REGISTER
CS SCLK SDIN
GND
Figure 1.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone]
©2007 Analog Devices, Inc. All rights reserved.