AD5412_09 Datasheet, PDF (1/40 Pages) Analog Devices – Single Channel, 12-/16-Bit, Serial Input, Current Source and Voltage Output DACs

Single Channel, 12-/16-Bit, Serial Input,
Current Source and Voltage Output DACs
AD5412/AD5422
FEATURES
12-/16-bit resolution and monotonicity
Current output ranges: 4 mA to 20 mA, 0 mA to 20 mA,
0 mA to 24 mA
±0.01 % FSR typical total unadjusted error (TUE)
±3 ppm/°C output drift
Voltage output ranges: 0 V to 5 V, 0 V to 10 V, ±5 V, ±10 V
10% overrange
±0.01 % FSR typical total unadjusted error (TUE)
±2 ppm/°C output drift
Flexible serial digital interface
On-chip output fault detection
On-chip reference: 10 ppm/°C maximum
Asynchronous clear function
Power supply range
AVDD: 10.8 V to 40 V
AVSS: −26.4 V to −3 V/0 V
Output loop compliance: AVDD – 2.5 V
Temperature range: −40°C to +85°C
TSSOP and LFCSP packages
APPLICATIONS
Process control
Actuator control
PLC
GENERAL DESCRIPTION
The AD5412/AD5422 are low-cost, precision, fully integrated
12-/16-bit digital-to-analog converters (DAC) offering a pro-
grammable current source and programmable voltage output
designed to meet the requirements of industrial process control
applications.
The output current range is programmable at 4 mA to 20 mA,
0 mA to 20 mA, or an overrange function of 0 mA to 24 mA.
Voltage output is provided from a separate pin that can be
configured to provide 0 V to 5 V, 0 V to 10 V, ±5 V, or ±10 V
output ranges; an overrange of 10% is available on all ranges.
Analog outputs are short and open-circuit protected and can
drive capacitive loads of 1 μF.
The device operates with an AVDD power supply range from
10.8 V to 40 V. Output loop compliance is 0 V to AVDD – 2.5 V.
The flexible serial interface is SPI- and MICROWIRE™-
compatible and can be operated in 3-wire mode to minimize
the digital isolation required in isolated applications.
The device also includes a power-on-reset function, ensuring
that the device powers up in a known state. The part also
includes an asynchronous clear pin (CLEAR) that sets the
outputs to zero-scale/midscale voltage output or the low
end of the selected current range.
The total output error is typically ±0.01% in current mode and
±0.01% in voltage mode.
Table 1. Pin-Compatible Devices
Part Number
Description
AD5410
Single channel, 12-bit, serial
input current source DAC
AD5420
Single channel, 16-bit, serial
input current source DAC
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone]
©2009 Analog Devices, Inc. All rights reserved.