AD5405 Datasheet, PDF (1/24 Pages) Analog Devices – Dual 12-Bit, High Bandwidth, Multiplying DAC with 4-Quadrant Resistors and Parallel Interface

Dual 12-Bit, High Bandwidth, Multiplying DAC with
4-Quadrant Resistors and Parallel Interface
AD5405
FEATURES
On chip 4-quadrant resistors allow flexible output ranges
10 MHz multiplying bandwidth
Fast parallel interface write cycle: 58 MSPS
2.5 V to 5.5 V supply operation
±10 V reference input
Extended temperature range: −40°C to 125°C
40-lead LFCSP package
Guaranteed monotonic
4-quadrant multiplication
Power-on reset
Readback function
.5 µA typical current consumption
APPLICATIONS
Portable battery-powered applications
Waveform generators
Analog processing
Instrumentation applications
Programmable amplifiers and attenuators
Digitally-controlled calibration
Programmable filters and oscillators
Composite video
Ultrasound
Gain, offset, and voltage trimming
GENERAL DESCRIPTION
The AD5405¹ is a dual CMOS, 12-bit, current output digital-
to-analog converter (DAC).This device operates from a 2.5 V to
5.5 V power supply, making it suited to battery-powered and
other applications.
The applied external reference input voltage (VREF) determines
the full-scale output current. An integrated feedback resistor
(RFB) provides temperature tracking and full-scale voltage
output when combined with an external I-to-V precision
amplifier. This device also contains all the 4-quadrant resistors
necessary for bipolar operation and other configuration modes.
This DAC utilizes data readback, allowing the user to read the
contents of the DAC register via the DB pins. On power-up, the
internal register and latches are filled with zeros and the DAC
outputs are at zero scale.
As a result of manufacture with a CMOS submicron process, the
device offers excellent 4-quadrant multiplication characteristics,
with large signal multiplying bandwidths of up to 10 MHz.
The AD5405 has a 6 mm × 6 mm, 40-lead LFCSP package.
1 _{US Patent Number 5,689,257.}
V_DD
DATA
INPUTS
DB0
DB11
AD5405
R3A R2_3A R2A
R3
R2
2R
2R
V_REFA _R1A
R1
2R
RFB
2R
INPUT
BUFFER
LATCH
12-BIT
R-2R DAC A
R_FBA
I_OUT1A
I_OUT2A
DAC A/B
CS
R/W
LDAC
GND
CONTROL
LOGIC
LATCH
12-BIT
R-2R DAC B
POWER-ON
R1
RESET
R3
R2
2R
2R
2R
R3B R2_3B R2B V_REFB R1B
RFB
2R
Figure 1. AD5405 Functional Block Diagram
I_OUT1B
I_OUT2B
R_FB B
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone] © 2004 Analog Devices, Inc. All rights reserved.