917_15 Datasheet, PDF (1/6 Pages) Analog Devices – Short Circuit Protected

DESCRIPTION
Analog Devices Power Supplies are designed to provide .OEMs and circuit
designers with a broad line of high reliability, regulated and short circuit
protected power supplies at low overall cost. These modules are available
with 5 volt to 24 volt output (single and dual), and current ratings from
25mA to 1 amp. Most Analog Devices Power Supplies are available
from stock in both large and small quantities. Substantial discounts
apply on quantity orders.
ADVANTAGES
FEATURES
Packaged circuit modules have found wide acceptance. Engineers have
discovered the convenience and economy of plug-in building blocks ...
op amps, logic cards, miniature AID and DIA converters are now
available in wide varieties. Now a complete line of modular power
Short Circuit Protected
Line & Load Regulated
Small Size
OBSOLETE supplies is available from Analog Devices. Most of these units are
packaged in the popular encapsulated case. They are shipped ready to
use, at prices below the internal manufacturing cost of most OEM
users. Further savings and reduced lead time are achieved by elimi-
nating engineering start-up, documentation costs, and manufacturing
delays. Designed by experts in op amp and digital logic technology,
these units offer features that you would expect to find only in
considerably more expensive supplies.
ENCAPSULATED MODULES (900 SERIES)
This line of modular power supplies covers most popular applications
except for high current loads. These supplies all feature line and
load regulation and are short circ!Jit protected. Mating sockets
are available, or the unit may be mounted on and soldered directly to
a printed circuit card. Voltage ranges include 5VDC to :!:24VDC.
Current ranges extend from 25mA up to 1 amp.
METAL CASED MODULES (900 SERIES)
5VDCto:t24VDC
25mA to 1000mA
TemperatJ.ireCom
. Low C_.!ost ,from_{. ,}
The :!:15VDC, 300mA, 500mA and 1 amp cased power supplies are
designed with the system designer's needs in mind. These units provide
the power needed to run large Modularized, Transistorized and
Integrated Circuit systems. The 300 and 500mA supplies come in
3.5 inch cube cases with an 11 pin connector (supplied). The:!: 15 volt,
1 amp unit is mounted in a finned case and has barrier terminal strip
connectors. All of these units provide for remote sensing.
EXTRA-HIGH ACCURACY SUPPLIES (MPD SERIES)
Analog Devices "MPD" line of Power Supplies are intended for appli-
cations where the ultimate in performance is required. They feature
excellent regulation and low temperature coefficients. Typical appli-
cations include providing stable references for computing, instrument,
and data reduction circuitry. All MPD supplies are sealed in anodized
aluminum enclosures for maximum ruggedness and minimum RFI.
Being essentially DC to DC converters, these units feature low "see
through" capacitance (typically 20pF) and are desirable for powering
floated circuits and use in systems having considerable ground noise.
OPTIONS
Most supplies are available with 205-240V AC, 50-400Hz input at no
additional charge. Specify option "E" when ordering. Models 904 and
909 are available with a transformer shield which reduces input to
output see-through capacity to 10pF max. Specify option 'T' when
ordering and add $8 each to unit prices. Model 906 (5VDC/250mA)
available with 6.0VDC overvoltage protection at $8 each additional. All
other 5VDC logic supplies (Models 903 and 905) include overvoltage
protection at no additional charge.
CO72a-5-11/72
-~-
~-
---
PRINTED IN U.s.A.
ANALOG III
DEVICES~
ROUTE ONE
INDUSTRIAL PARK
P. O. BOX 280 NORWOOD, MASS. 02062
TEL: [phone]
TWX: 710/394-6577
--
---.-