ACT8942_14 Datasheet, PDF (36/44 Pages) Active-Semi, Inc – Advanced PMU for Amlogic AML8726-M3 Processor

close proximity to noisy nodes, particularly the SW
nodes of the DC/DCs.
REFBP is a noise-filtered reference, and internally
has a direct connection to the linear regulator
controller. Any noise injected into REFBP will
directly affect the outputs of the linear regulators,
and therefore special care should be taken to
ensure that no noise is injected to the outputs via
REFBP. As with the LDO output capacitors, the
REFBP bypass capacitor should be placed as close
to the IC as possible, with short, direct connections
to the star-ground. Avoid the use of via whenever
possible. Noisy nodes, such as from the DC/DCs,
should be routed as far away from REFBP as
possible.
ACT8942
Rev 2, 15-Nov-12
Innovative Power^TM
Active-Semi Proprietary―For Authorized Recipients and Customers
ActivePMU^TM and ActivePath^TM are trademarks of Active-Semi.
I²C^TM is a trademark of NXP.
- 36 -
www.active-semi.com
Copyright © 2012 Active-Semi, Inc.