BPW484-1030-22AB95L Datasheet, PDF (7/8 Pages) Actel Corporation – SE-FGG484-S-H, E-Tec lead free prototype socket drawing for FG484 23x23 and FGG484 23x23 packages

Socket Mounting Recommendations and Reflow Profile
b) Knob Lock / Quick Lock / Clamshell Socket
It is recommended to remove the Knob Lock, Quick Lock and Clamshell retainer from the socket
base prior to soldering the sockets to the PCB. This will avoid socket displacement during the
soldering process due to the weight of these retainers. User instructions on how to remove and
reassemble the Clamshell retainer from the socket base can be obtained from E-tec.
c) Pick & Place Pads
Pick & place pad options can be obtained on request for all SMT sockets. If required, please
contact E-tec prior to placing a purchase order, since such pick & place pad options may require
special fixtures on the socket base which are not included in the standard socket design.
E-tec Interconnect Ltd, Industrial Zone C, CH-1072 Forel (Lavaux), Switzerland
5
Phone [phone] · www.e-tec.com · [e-mail]
E-tec Socket Mounting Recommendations
PRELIMINARY