A24D16 Datasheet, PDF (1/2 Pages) Actel Corporation – VME A24D16 Slave Controller

Optimized for
VME A24D16 Slave Controller
Description
The VMEbus was first standardized in 1981 and is still in wide use. With the
advances in integration technologies, custom integrated VME controllers open the
door for smaller and cheaper systems. Inicore offers a wide range of different VME
slave controllers. Each one optimized for a certain application. The difference lies
mainly in the address and data bus width and the supported data modes.
The VME slave controller shields all the complexity of the asynchronous VMEbus
and provides an easy-to-use, synchronous parallel user side interface towards
custom logic. A built-in interrupter handles all local interrupt requests and
acknowledgments.
INT Cmod
TIM ERmod
GPIOmod
U A RT mod
Bus Bridge
User Decode
VMEchip
Figure 1: Sample application
The figure above illustrates a typical application where several peripheral
functions together with the VME slave core as well as a bus bridge are integrated
into one FPGA.
Supported modes
• Data modes: D8, D16
• Address modes: A16, A24
• Access modes: Read, write, read-modify-write, block transfer (BLT)
• Interrupter: D8, D16, RORA, ROAK
Features
• ANSI/VITA 1-1994
compliant
• VME slave controller
• Data modes: D8, D16
• Address modes: A16, A24
• Supports read, write, read-
modify-write and BLT cycles
• Configurable D8 or D16
interrupter
• Fully synchronous user side
interface
• User selectable wait-states
• Synchronous design
Applications
• Industrial control
• Military
• Aerospace
• Telecom
• Medical
Sample Utilization and Performance Table Optimized for Actel Devices
Family
ProASIC^PLUS
Axcelerator
SXA
RTSX
Device
- (speed grade)
APA150
AX500-3
SX32A-3
RTSX72S-1 MIL
s-mod
137
137
137
Utilization
c-mod
Tiles
289
68
70
70
RAM
Total
5%
3%
7%
4%
Performance
[MHz]
123
151
135
53
INICORE INC. 5600 Mowry School Road Suite 180 Newark, CA 94560 Tel: [phone] Fax: [phone] www.inicore.com
Page 1/2