TCTK75-6 Datasheet, PDF (1/3 Pages) Advanced Crystal Technology – LOW POWER HCMOS 1/60Hz ~ 32.768kHz TCXO

Tel
Fax:
email:
0044(0)118 979 1238
0044(0)118 979 1283
info@act crystals.com
ACT TCTK75-6 LOW POWER HCMOS 1/60Hz~32.768kHz TCXO
● Stability:
±5ppm (-40+85°C)
● Accuracy:
±1.5ppm
● Operating current: 400nA typical
Characteristics
Frequency Range (MHz)
32.768 kHz, 4.096 kHz, 1.024 kHz
Supply voltage ±5% Vcc (V_DC)
Operating temperature Top (°C
128 Hz, 32 Hz 1 Hz ¹/₁₀ Hz, ¹/₆₀ Hz
1.8, 2.5, 3.0, 3.3, 5.0
-40 ~ +85°C
Operating Current (mA max)
Fig 1
Stabilty v T op (ppm)
±5 (Fig 2)
Stabilty v Vcc(ppm)
±0.2 (±5% change)
Stabilty v Load (ppm)
±0.2 (±10% change)
Stabilty v 1 reflow (ppm)
±1.0 (24hrs after reflow)
Aging @25°C (ppm)
±3 first year max
Tolerance @ 25°C (ppm)
±1.5
Load ±10%
15pF HCMOS
Output voltage (V) (I_OL 0.1mA)
Duty Cycle (%)
Start up time (ms, max)
Switching Jitter (ns)
V_OH Vcc-0.4 min, V_OL 0.4V max
4//60 (kHz range), 45/55 (Hz range )
1 (25°C), 3(85°C)
2000 (kHz range), 0 (Hz range)
Compensation interval (Fig 3)
Pad 1
Rating
4 min std, 2min, 1min,0.5min options
Tristate (Enable high)
Storage temperature (°C)
ESD Sensitivity (KV)*
-40 ~ 85 max
2 (HBM) IEC 61000-4-2
MSL
Level 1 IPC/JEDEC JSTD-020D.1
Pad surface
0.3~1.2µm Au over 1.27~8.89µm Ni
Leak rate
<2x10⁸ ATM/cm³
Notes:
*ESD sensitive, take appropriate precautions.
Compensation period: see note on page 2
Fig 1
Please note that all parameters can not necessarily be specified in the same device.
To specify: Please refer to part numbering system appended to the end of this data
ISO9001 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY
Issue No.
4 M6
Date:
16/10/2013