ACTZTTCC Datasheet, PDF (1/2 Pages) Advanced Crystal Technology – SMD Resonators

Tel :
Fax :
email :
0044 (0)118 979 1238
0044 (0)118 979 1283
[e-mail]
ACT ZTTCC SMD Resonators
The ACT ZTTCC family of Ceramic SMD Resonators offers a cost effective
solution for applications requiring good stability over a wide temperature
range, together with accuracy to ±0.5%.
Specification
Part Type/
Number
Frequency
Range MHz
Test IC
Vdd Frequency Stability over
accuracy
temp. range
@25°C (%) (-20 +80°C)(%)
ZTTCC MG
1.8 ~ 2.4
CD4069UBE x 2
+5V
±0.5
±0.3
2.4 ~ 8.0
Aging over
10 years
(%)
Internal
Cap. (pF)
C1 & C2
±0.3
33/20 INTERNAL
22/20 INTERNAL
Pad surface material Sn over Sn/Cu/Ag
P2
P2
P1
Important note when using Ceramic resonators with micro controllers:
Some resonator parameters vary considerably with frequency and physical construction/size . These differences
are too great to be able to be practically shown in a data sheet.
However, these parameters can be critical when the resonators are used with micro controllers. Even if two
different resonators appear to have the same specification the typical values of these critical parameters can be
considerably different. When enquiring about resonators for use with micro controllers it is important to supply the
make and part number of the IC to be used and/or the list of recommended resonators, if this is given.
Please note that all parameters can not necessarily be specified in the same device
Customer to specify : Frequency
In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice
ISO9001:2000 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK
http://www.actcrystals.com
Issue : 9 C1r
Date : 01/108/07