ACTOCXO36 Datasheet, PDF (1/1 Pages) Advanced Crystal Technology – Voltage Controlled Frequency Adjustment

Tel : [phone]
Fax: [phone]
Email : [e-mail]
FEATURES
APPLICATIONS
■ Stability up to ±0.01PPM
■ Low Aging
■ Voltage Controlled Frequency Adjustment
■ Measurement Equipment
SPECIFICATIONS
■ PCS / Cellular Base Station
■ Digital Switching
■ Synthesizer
■ SC Cut – Please enquire
Frequency Range
1.0 ~ 100MHz
Frequency Accuracy ( Adjustment 25°C)
±0.5PPM (Centre control voltage)
Frequency Stability vs Temperature
Aging (AT Cut)
(SC Cut)
See Table 1
±0.001PPM/day, first year ±0.1PPM, 10 years ±1PPM
±0.001PPM/day, first year ±0.1PPM, 10 years ±1PPM
Output Type and Load Characteristics
Frequency Stability vs Load
See Table 2
±0.02PPM vs ±10% load change
Supply Voltage
Frequency Stability vs Voltage
Supply Consumption
Warm-up Time (AT Cut)
(SC Cut)
Adjustable Frequency
+5.0VDC, +12.0VDC ( 3V3 – Custom option )
±0.02PPM vs ±5% voltage change
3.6W (max.) warm-up; 1.2W (max.) static
±0.2PPM, <1 min.
±0.05PPM, <1 min.
AT Cut ±7.0PPM
Control Voltage Range
0~5V
Slope
Linearity
Positive
±10%
Phase Noise (10MHz)
1Hz, -80dBc/Hz, 10Hz, -120dBc/Hz
Storage Temperature Range
100Hz, -140dBc/Hz, 1kHz, -145dBc/Hz, 10kHz, -150dBc/Hz
-40 ~ +100°C
FREQUENCY STABILITY vs TEMPERATURE – TABLE 1
( Applies to frequencies < 20MHz & to 12v0 supply. For frequencies > 20MHZ & 3v3 & 5v0 Stabilities will be lower –Please enquire )
Frequency Stability vs Temperature
Temperature Range
±0.01PPM (AT Cut)
±0.03PPM (AT Cut)
±0.05PPM (AT Cut)
0 - +50°C
-20 - +70°C
-40 - +75°C
(Unit: mm)
PIN FUNCTION:
PIN1 – Control Voltage
PIN2 – Reference Voltage/NC
PIN3 – Power Supply
PIN4 – Output
PIN5 – GND
Output
Waveform
Clipped Sine
Wave
TTL
HCMOS
ACMOS
Sine Wave
OUTPUT TYPE AND LOAD CHARACTERISTICS – TABLE 2
Frequency Range
Oscillation State
Output Characteristics
8MHz - 30MHz
10MHz - 100MHz
1MHz - 30MHz
10MHz - 100MHz
1MHz - 30MHz
10MHz - 100MHz
1MHz - 30MHz
10MHz - 100MHz
8MHz - 30MHz
10MHz - 100MHz
F: Fundamental
O: Overtone
F: Fundamental
O: Overtone
F: Fundamental
O: Overtone
F: Fundamental
O: Overtone
F: Fundamental
O: Overtone
Load: 10kΩ/10pF
Output level: >1Vp-p
Load: Max. 10 low power consumption TTL gates
“1” level: >+2.4VDC; “0” level: <+0.2VDC
Duty cycle: 45/55
Rise/fall time: <6ns
Load: Max. 10 low power consumption TTL/HCMOS
“1” level: >+4.3VDC; “0” level: <+0.5VDC
Duty cycle: 45/55
Rise/fall time: <6ns
Load: Max. 10 low power consumption TTL/ACMOS
“1” level: >+4.3VDC; “0” level: <+0.5VDC
Duty cycle: 45/55
Rise/fall time: <6ns
Load: Nominal value 50Ω
Output level: >2dBm
Harmonic Attenuation: >-25dB
Noise Attenuation: >-75dB
Please note that all parameters cannot necessarily be specified in one device.
Customer to specify : Frequency, Output, Voltage, Stability, and Operating Temperature
In line with our ongoing policy of product improvement and evolvement the above specification may be subject to change without notice
IS9001:2000 Registered
For quotations or further information, please contact us at :
Issue : 4 S8
3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY UK
http:/www.actcrystals.com
Date: 26/09/06