ACT9353 Datasheet, PDF (1/2 Pages) Advanced Crystal Technology – miniature low profile Clock Oscillator,

ACT9353
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
The ACT9353 is a miniature low profile Clock Oscillator, housed in a ceramic leadless chip
carrier with a SMD seam welded metal lid for high reliability and long term stability. The metal lid
is grounded via the package to assist with EMI emission control. This 5x3.2mm packaged
device is available in 1.8 ~ 5.0 volt supply voltages and with stabilities from ±20ppm to ±100ppm
It is suitable for a wide range of applications. Taped and reeled packaging and loose quantities
are available for purchase, to suit high and low volume requirements. The pads are gold plated
on all surfaces to allow a variety of assembly processes, including reflow and wire bonding
Specification
Parameter
Frequency Range
Frequency Stability
Symbol
f₀
Δf/f₀
Specification
1.000 to 50.000MHz
±20, ±25, ±50 or ±100ppm
( Inclusive of Operating Temperature,range,Supply Voltage & Load )
Please specify
Please specify
Operating Temperature Range Topr
Storage Temperature Range Tstg
Supply Voltage
V_DD
Duty Cycle
Tw/t
0 ~ +70°C & -40 ~ +85°C
-55 to +125°C
1.8V, 2.5V, 3.3V & 5.0V
40/60% Std, ( Option 45/55% )
( At 50% of Waveform w/HCMOS Load or 1.4DC w/TTL Load )
Please specify
Please specify
Please specify
1.8VDC±10%
2.5VDC±10%
3.3VDC ±10%
5.0VDC±10%
Supply Current (max)1-12.9999MHz I_DD
Supply Current (max)13-34.999MHz I_DD
Supply Current (max)35-50MHz
I_DD
Output Level ‘0’
V_OL
Output Level ‘1’
V_OH
Rise & Fall Time (max)
T_r/T_f
Output Load
N/CL
5mA
7mA
7mA
7mA
8mA
15mA
10mA
15mA
25mA
10% VDD max (HCMOS)
90% VDD min (HCMOS)
10nS max
10TTL Load or 15pF HCMOS Load ( Std )
10mA
20mA
30mA
Start-up Time
Tosc
10mS max
Tri-state Input Voltage
Aging
F_a
Reflow Profile
Jitter
No Connection
Enable output
V_IH : ≥0.7 V_DD
V_IL : ≤0.3 V_DD
Enable output
Disable output : High Impedance
±5 ppm p/yr. max @25°C
( ±3ppm Available to "custom" order )
10 secs @ 260°C Max
( See page 2 for full profile )
Please refer to table below
f_O MHz
Jitter Parameter
Phase 12kHz~20MHz
Typical(pS)
8
Max(pS)
10
1 ~12.999
Period (rms)
10
15
Period (pk-pk)
56
70
Phase 12kHz~20MHz
5
7
13 ~ 34.999
Period (rms)
7
10
Period (pk-pk)
45
60
Phase 12kHz~20MHz
5
7
35 ~ 50.000
Period (rms)
6
8
Period (pk-pk)
35
50
Pad finish: Au
APPLICATIONS -Microprocessor clock -Audio
-PDA/Notebook
-Ethernet
-Wireless applications -Fibre channel
-Instrumentation
Please note that all parameters can not necessarily be specified in the same device
Customer to Specify : Frequency, Frequency Stability, Operating Temperature Range, Voltage, Duty Cycle
In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice.
ISO9001: 2000 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK
Issue : 3 SK
http://www.actcrystals.com
Date 29/10/07
1of 2