ACT9211 Datasheet, PDF (1/1 Pages) Advanced Crystal Technology – LVPECL or LVDS Clock Oscillator

Tel :
Fax :
email :
0044 (0) 118 979 1238
0044 (0) 118 979 1283
[e-mail]
ACT9211 LVPECL or LVDS Clock Oscillator
The ACT9211 7x5mm LVPECL/ LVDS Oscillator is a miniature low profile device allowing for frequencies up to
200.0MHz to be available in a 7X5 mm SMD package utilising fundamental and 3rd overtone crystals and without
employing a multiplier. The metal lid is grounded through the ceramic package and the pads are gold plated. This
device is particularly suited to Communications Wireless & Networking applications and also to many other
applications where an LVPECL or LVDS output is desirable. These competitively priced devices are available
packaged as loose or taped and reeled parts, to suit both low and higher volume requirements.
Specification
Parameter
Symbol
Frequency
f₀
Operating Temp Range
T_opt
Storage Temp Range
T_stg
Frequency Stability
Δf/f₀
Duty Cycle
Output
Supply Voltage
Supply Current (max)
Output Level ‘0’
Output Level ‘1’
Output Differential Voltage
Offset Voltage
Output Load
Tw/t
V_DD
I_DD
V_OL
V_OH
N/CL
Output Enable High
Output Enable Low
Rise & Fall Time (max)
T_r/T_f
Start-up Time
T_osc
Aging
F_a
Phase Jitter
Period Jitter (rms)
Period Jitter(pk-pk)
Specification
9.5000MHz ~ 200.00MHz
0~+70ºC /-10~+70°C /-20~+70°C / -40~+85ºC
-55ºC~+125ºC
±20,±30,±50 or ±100ppm
( Inclusive of Operating Temperature, Range, Supply Voltage & Load )
50±10% Std, 50±5% Optional ( 50% of Waveform)
LVPECL
2.5VDC ±5% & 3.3V ±5%
LVDS
2.5VDC ±5% & 3.3V ±5%
65mA max (2.5V ), 80mA max (3.3V)
45mA max (2.5V ), 55mA max (3.3V)
V_DD-1.620V max
V_DD-1.025V min
1.1V max
1.4V min
247~454mV, 350mv Typical
1.125~1.375V, 1.2V Typical
V_DD-2.0V_DC to 50Ω
Part Code SX Part code SC #
100Ω Differential Load
Part code SC
Enable High
Enable Low
Enable High
Disable low
Disable high
Disable Low
700pS Typical, 1.5nS max
10mS max
±3ppm/year max
0.7ps typical 1.0ps max
2.0ps typical 3.0ps max
20ps typical 25ps max
Condition
Please specify
Please specify
Please specify
Please specify
Please specify
Please specify
# : Not for new designs
No connection(default)
No connection(default)
@20~80% of Waveform
@ 25ºC
(12kHz ~ 20MHz )
Complementary Output
TAPE AND REEL SPECIFICATION
Standard Reel Size 1K pieces
Pad Surface Finish : Au over Ni
Please note that all parameters can not necessarily be specified in the same device
Customer to Specify : Frequency, Frequency Stability, Voltage, Operating Temperature Range, LVPECL or LVDS & Duty Cyc
In line with our ongoing policy of product evolvement and improvement, the above specification may subject to change without notice
ISO9001:2000 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK
Issue : 4 SKr
Date : 13/2/08
http://www.actcrystals.com