ACK-1915 Datasheet, PDF (1/1 Pages) Applied Concepts Inc. – LED MODIFIED DISPLAY AND DRIVER KIT

397 Route 281 ± P.O. Box 1175
Tully, New York 13159-1175
Phone: [phone]
Fax: [phone]
Email: [e-mail]
www.acipower.com
ACK-1915
KIT DATASHEET
03/23/10
LED MODIFIED DISPLAY AND DRIVER KIT
GENERAL DESCRIPTION
The ACK-1915 kit consists of the LED Modified AUO
G170EG01 V0 SXGA TFT LCD 17´ Display and two LED
Drivers. The resulting performance provides a
brightness of 1000 cd/m².
Performance at given brightness level
1000 cd/m² with 33.5 Watts LED Power
KIT Includes:
QTY P/N
1
ACD-AU170-1896
2
ACI-E120175-1900
2
27-R0061
DESCRIPTION
LED Modified Display
LED Driver
Input Cable Assembly
INPUT CABLE ASSEMBLY
+10 to +15V (PWR)
1, 2, 3, 4
GND(PWR)
5, 6, 7, 8
ENABLE
9
ICNTL
TBD
TBD
+5V REF OUT
GND(SIGNAL)
10
11
12
13
14
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10 10
11 11
12 12
13 13
14 14
LED
DRIVER
55
44
33
22
11
LED MODIFIED DISPLAY
+10 to +15V (PWR)
1, 2, 3, 4
GND(PWR)
5, 6, 7, 8
ENABLE
9
ICNTL
TBD
TBD
+5V REF OUT
GND(SIGNAL)
10
11
12
13
14
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10 10
11 11
12 12
13 13
14 14
LED
DRIVER
55
44
33
22
11
INPUT CABLE ASSEMBLY
1. Tie the +10 to +15V (PWR) leads together from both drivers.
2. Tie the GND (PWR) leads together from both drivers.
3. If using the Enable line, tie the Enable leads together from both drivers.
4. If Enable line is not being used, it may be left electrically floating.
5. If dimming is not being used, tie the ICNTL lead to the +5V REF OUT lead together for each driver.
6. If dimming is being used, tie the ICNTL leads together from both drivers. A 10K OHM Potentiometer is recommended.
7. If the +5V REF OUT is being used for the high side of the Potentiometer, use only one of the +5V REF OUT leads.
Page 1 of 1